Search results

  1. C

    Vaillant boiler removal.

    @kidgreen61 It not a case of unhooking the boiler. When I have renovated houses before they have been removed incase of theft. These are a common boiler for local authority and I've come across them many times, as has my gs plumber. However this particular one doesn't unhook it has no free...
  2. C

    Vaillant boiler removal.

    Hi All. I have bought an ex council house and it has a fairly new Vaillant eco tec pro 28. I have had a gas safe plumber in to reroute the pipe work as the wall is being removed where the boiler currently is. That's all been done however neither my plumber, myself, or anyone else who has...
  3. C

    Honeywell alarm reset

    Thank you for your reply. I have sent some pictures over. It's a Honeywell g2 -12 according to the cover. Again thanks.
  4. C

    Honeywell alarm reset

    Hi all. Does anyone know how to reset the engineer code on a honeywell control panel? One of my customers has one fitted and after having the house decorated can't get the tamper to reset. It requires an engineer code which they don't have. I usually install texecom which has the master reset...
  5. C

    Gjd 040 expansion unit operation upon alarm activation.

    Thankyou for all your assistanec Sparkymarka. I have bought the controll unit and the relay activates it as it should. Thanks for helping out. I have noticed the price was very steep and thought there must have been a simpler way to get a controll panel to activate flood lights. Can you let...
  6. C

    Gjd 040 expansion unit operation upon alarm activation.

    The flood lights do work as i have a seperate feed to a switch that brings them on. I'm 100% confident in the cabling from he expander to the flood lights as i have gard wired them to a 240v supply and they work. The expander is only replacing a switch. I have removed the relay and touched...
  7. C

    Gjd 040 expansion unit operation upon alarm activation.

    this is how I have wired the relay
  8. C

    Gjd 040 expansion unit operation upon alarm activation.

    I am trying to get a GJD 040 4 zone expansion unit to operate the flood lights on alarm activation. I have connected a relay and diodes as per the diagram but I can't get the lights to operate when the bell goes off. Can someone please advise. Thank you.
  9. C

    How to connect a Texecom premier elite 24 to a GJD 040 lighting relay

    Can anyone please advise how this relay needs to be connected to the alarm panel and lighting controll relay. I'm wanting to connect it to the bell output of the alarm panel. Thank you
  10. C

    Texecom ricochet range /distance.

    Thank you for your response. It's much appreciated.
  11. C

    Texecom ricochet range /distance.

    Does any one know the distance of the ricochet system I understand about the mesh technology but it doesn't really help in this case as I have one outbuilding around 60m direct line away from the receiver. The existing alarm is a texecom premier elite 24 wired. I am intending to add a...
  12. C

    How to connect a Texecom premier elite 24 to a GJD 040 lighting relay

    Thank you for taking the time to send the info. Is there a specific relay that I should get? Again thank you.
  13. C

    How to connect a Texecom premier elite 24 to a GJD 040 lighting relay

    Can anyone please advise how I connect a texecom alarm to a GJD 040 expansion module to bring exterior lights on when the alarm sounds. I am hoping to use a texecom veritas r8+ Or a texecom premier elite 24. Thanks to anyone in advance.
  14. C

    Texecom premier elite 24 wiring

    I know you have better things to do other than having me pestering you but I thought I'd let you know the out come of the install. I managed to run all the PIR's and the beam break from the Controll panel and did away with the wired expander (thanks for the help with the EOL resistors) The...
Top