Search results

  1. D

    Draining downstairs on microbore system

    How do I drain a downstairs radiator on a microbore system if the pipes run from an upstairs manifold?
  2. D

    Domestic hot water temperature too hot

    Yes, I cut a hole in insulation so that the sensor is touching copper, but water still way too hot. How would you fit a sensor band to an insulated cylinder anyway, do you have to strip off the insulation right round the tank?
  3. D

    Domestic hot water temperature too hot

    As a new member I have found this site to be very good (-: I recently fitted a new hot water cylinder in the airing cupboard. The old one did not have insulation bonded to it and had a pocket for the water temperature sensor. Obviously the new cylinder does not have this pocket. How can I...
  4. D

    Radiator trapped air

    Thanks for your help, How do you get rid of sludge from a microbore system where the manifolds are upstairs and the pipes drop down to each radiator. Do I have to empty each downstairs radiator individually? Dave
  5. D

    Radiator trapped air

    I have a microbore system. Most mornings when I switch the heating on, one radiator in the hallway does not get hot. If I switch all the other rads off I then hear air coming through it and it warms up. I can then switch the other rads back on and it is ok till the next time the heating is...
Top