Search results

  1. G

    UPVC Window Rubber Seals

    Dear All I know you are able to buy the replacement rubber seals for the side that is removeable but is there any way to replace/repair the rubber seals that are attached to the plastic window frame itself; on mine this is on the outside? Thanks
  2. G

    Large Junction Box

    Thanks guys I feel that item...
  3. G

    Large Junction Box

    Sorry guys I am not home at the moment to take a picture but the cores are similar to this: http://thumbs3.ebaystatic.com/d/l225/m/mx275u0BKt6fm1LI0KkwR3w.jpg
  4. G

    Large Junction Box

    That is correct Iggifer - spot on. But whereas in your image the cables have a single core my have multiple core so am unable to really get more than say ring in & ring out within the connectors. Make sense?
  5. G

    Large Junction Box

    Thanks for the links guys. The issue is that the three different cables have so many cores that it is diffcult to fit them all into the connector blocks & I assume it is not good practice to remove some of the ends of individual cores to free space???
  6. G

    Large Junction Box

    It will be internal and the three cables are all 2.5mm.
  7. G

    Large Junction Box

    Hi there Yes it is twin and earth. I can send a photo of easier. Can you send an example link of a JB that would do the job. Thanks
  8. G

    Large Junction Box

    Hi Guys I have a cable run directly from my CU to my garage attached to my home. I want to utilise this feed approx half way along and spur off it but this then gives me the feed, the existing continuation and then the new extension I want to add. Thus far I cannot seem to find a junction box...
  9. G

    Large Junction Box

    Hi All I want to install a junction box that is capable of connecting three 32-amp mains cabled but everyone I have tried so far just doesn't have the capacity due to the thickness of the cables; the terminal connectors are too small. Is there any recommendations for doing this? Thanks Graham
  10. G

    Hotpoint WMD962 Drum Bearing Replacement

    Dear All The bearings on my Hotpoint WMD962 washer sound like they are on the way out. I was wondering if it is worth the effort doing the job or paying for a repair? Looking online you cannot buy just the bearings & have to replace the whole drum unit which looks like a big job and the part...
  11. G

    11.5v Electronic Transformer VS 12v

    I got this cheap Wickes one as per previous post: http://www.wickes.co.uk/Wickes-105VA-Electronic-Transformer/p/162383
  12. G

    11.5v Electronic Transformer VS 12v

    Dear All Just to jump in mid conversation; I swapped the Screwfix unit out for a single output 12v jobby and full brightness has returned. Bye for now.
  13. G

    11.5v Electronic Transformer VS 12v

    They are 10W 12v
  14. G

    11.5v Electronic Transformer VS 12v

    Thanks for the info guys. I've just doubled checked and actually the lights is one single set of 10 small halogens. Therefore the only real difference is the 0.5v. I have another set of 10 right next to this and it still has the original transformer which Is definitely brighter. Would one like...
  15. G

    11.5v Electronic Transformer VS 12v

    If I split out the sets will that make a difference to the brightness then?
  16. G

    11.5v Electronic Transformer VS 12v

    It's this transformer: http://m.screwfix.com/p/robus-electronic-transformer-35-105va/92658
  17. G

    11.5v Electronic Transformer VS 12v

    I haven't tested the new one no and the old one is dead. One thing I did fail to mention is that the new one has three output connections when the old one only had one. The three lighting sets are joined to only connect to the transformer on one connections. Not sue if that ha any impact???!
  18. G

    11.5v Electronic Transformer VS 12v

    Today I replaced a dead electronic transformer rated at 105vA 240v primary 12v secondary with one of identical specification except the secondary was 11.5v which seems more standard nowadays. This transformer is for three sets of small halogens & I have noticed a big difference in brightness...
  19. G

    Mould On Ceiling

    Hi There Many thanks for the reply and information. I was just wondering why this seems to only be an issue in this one room? Even my bathroom does not suffer? Thanks Graham
  20. G

    Mould On Ceiling

    Dear All I have lived in my home for approx 5 years now & mould on the master bedroom ceilnig has slowly increased. I am trying to work out the cause & as such attach a picture of the setup & describe below. My home has low evaes meaning that the ceilings upstairs are all curved where they...
Top