Search results

  1. J

    Central heating mystery or misery

    I will try and get a pic on soon, it would show feed and return 22mm copper with two T peice poly plum , one one return and one on feed reducing to 15mm and going to the towl rail. All other piper work is original and has not been touched. I can tell becuase of the dust on the pipe work and...
  2. J

    Central heating mystery or misery

    The towl rail is the only new additon. It looks as though it is connected correcly Im no plumber but one goes into flow and the other goes into return, i can trace the pipe work start to finish. The other rads are exsisting rads and have always worked. They have had no changes to them.(checked...
  3. J

    Central heating mystery or misery

    Sorry guys i forgot to mention I have closed all rads off and upped pump speed and central heating heat to try and clear. also have fully bled system and checked, it has no more air. the cold rad is open both sides and does not have a stuck temp valve Thanks
  4. J

    New laptop to wireless ADSL

    do you have and exact error. try again and copy in exactly what its says. Try right click file select 'open with' select 'choose program' from the options select 'notepad' might help
  5. J

    Central heating mystery or misery

    Hi I have a cold downstairs radiator. I have recently had a towel rail fitted which was connected via 15mm polyplum to a T peice polyplum to a 22mm feed and return copper central heating pipes. The 22mm pipe feeds the newly installed towl rail then a radiator in the bedroom then it...
  6. J

    Baxi Solo 2 RS Will not fire burner

    Have bled the pump a good few times and the system has started to work after a lot of attemps and bubbling. I still have one dead radiator ground floor which refuses to heat, stone cold. Will give the chemical time to work through it.. Thanks for your help and advice...
  7. J

    Baxi Solo 2 RS Will not fire burner

    Totally no experience with Boilers After draining central heating and filling back up with a sludge remover, i bled all rads and fired up the pilot light on the baxi. Pilot lit and the boiler fired for around 2 mins then when out The pilot light is still on but the boiler will not fire...
Top