Search results

As you mention there is no RCD protection (unless I misread your post) it may be worth swapping the double socket for a version which includes an RCD? https://www.screwfix.com/p/british-general-13a-2g-rcd-switched-plug-socket/3133j

Hi, I have used this in the past.... https://www.screwfix.com/p/wd-40-specialist-contact-cleaner-400ml/92716 https://www.halfords.com/motoring/engine-oils-fluids/lubricating-penetrating-oil/wd-40-specialist-fast-drying-contact-cleaner-250ml Allow it to fully evaporate before reconnecting to...

Thanks, I think that's where I went wrong when linking the original Screwfix item. I was looking for someone who supplied the SW6L-MF (1 in , 6 switches, 6 lights) and ended up linking to the SW6S-MF (1 in, 6 lights). I can't seem to find a stockist of the former.

I apologise - I have linked to the incorrect product above but the one I have previously used has a permanent supply (L&N) in and a permanent supply out (L&N) - hence you can chain multiple boxes together. https://www.screwfix.com/p/surewire-sw4l-mf-16a-4-way-pre-wired-junction-box-white/2742j...

If this is a junction box which connects all the switch wires to the lamps would something like this be suitable? https://www.screwfix.com/p/surewire-sw6s-mf-16a-6-way-pre-wired-lighting-spur-junction-box-white/3216j It's pre-wired to take a permanent feed, and connect each switch with its...

The cables are likely to run to the old bell push location.

Probably when the batteries were last installed.. :) https://www.tlc-direct.co.uk/Technical/DataSheets/Friedland/117.pdf

Thank you.

These work with the Phillips Hue bridge (and other Zigbee bridges) if you want that type of functionality at a lower price... White colour temp change: https://www.ikea.com/gb/en/products/lighting/smart-lighting/tr%C3%A5dfri-led-bulb-gu10-400-lumen-wireless-dimmable-white-spectrum-art-00318292/...

Someone more knowledgeable will be along shortly, but in the meantime, what are you testing the cables with? For voltages as low as 12v with a simple multimeter it could be induced current from other circuits and therefore the cables are not actually 'live'.

Probably best not to :) You could remove the wire from the isolator (after switching off the relevant circuits) and then check there were no other negative affects once the power is back on (e.g. bathroom light not working). Although, as stated above, the current termination method you...

Lots of NAS devices also have additional features which include music servers. I believe the WD MyCloud has inbuilt DLNA server functionality, the Synology range of devices certainly do. I have a Synology alongside my microserver and the former is much easier to configure/manage, albeit with...

Yes, sorry I have edited my post as I can see that it didn't necessarily read correctly. I have tried to provide a more detailed response below... If wired correctly, the isolator switch outside the bathroom should be a final connection before the fan. This then allows you to isolate the fan...

If the isolator switch has been wired correctly then removing the permanent live from the *isolator* switch terminal will mean that the permanent live at the extractor fan will indeed be disconnected. However, assuming that the cable is fully insulated within the choc block, there is no issue...

It depends on the oven - some are supplied by the manufacturer with a 13A plug and can be plugged in. What make/model is the oven?

I thought kettles used C15/C16 ;)

None of these new fangled CUs. Just have every circuit on its own breaker :D

The price of Sierras is definitely on the increase. It may be worth advertising this on one of the owner's forums (e.g. XR Owners Club or even RS Owners Club).

A fair comment; I was just of the mindset that if I wanted to replace the CU I wanted to do it once with a good quality unit. The feedback on here over time has seemed to rate the Hager kit and therefore I opted for that setup. I'd rather buy once and buy right. I could have bought two...

I recently had the same issue and ended up having a Hager Design 10 dual row board installed. It consists of two rows of 8 ways in a split load configuration which provided a total of 10 usable ways. The dimensions are 227mm wide and 486mm high and therefore isn't much larger than a...