Search results

Unfortunately not - it's sealed on either side

I'm not sure if that's a serious suggestion?

How can I fill in this big gap in my steps to my front door. I have tried mortar, but it just falls through because there just empty space behind.

In the process of decorating the upstairs bedrooms. Took the wallpaper off and noticed a crack in the wall near the ceiling. Investigated further and took the wallpaper off on the otherside of the wall in the next room. There was a crack there too! The chimney runs upwards near the crack...... I...

I think some of us are being a little too harsh on this handyman.

Due to the bad weather we've had recently I didn't realise I brought ice into the house on my shoes. The ice melted and left a pool of water on the my laminate floor. Consequently the laminate floor at the joint has risen slightly. Is there a way of fixing this problem without replacing it or...

I am planning on converting my loft, but would like to remove the top part of the chimney to maximise space. Would this be too much of a structural job and not worth the hassle and is planning permission required?

Any chance of a new forum section? I have a bicycle that's causing me problems and no-where to ask technical info.

Tried it and still not working. I think I will have to call in someone to look at it. When I turn the valve, there is no water flowing at all. The ironic thing is that the pressure is just above 0bars and the heating still works fine.........

I have found the filling loop to re-pressurise my bolier. However, when I turn the black tap as shown in the following link, nothing happens. http://www.toolstation.com/images/library/stock/webbig/35419.jpg Do I need to tuen the valve on the other end of the filling loop..

I have located the filling valve turned it to re-pressurise my boiler.. but nothing happens (Don't even hear any water coming through) Any ideas?

The website has addtional instruction manuals

Thanks tonybhoy... I downloaded the user manual which explains how to do it

or should i be looking for this filling loop?? http://www.toolstation.com/images/library/stock/webbig/35419.jpg

Just found out that the black stopcock is the DHW inlet.. is there where I top up the pressure?

I have the above boiler and the boiler pressure reads just above 0. I still have hot water but am aware that I should top up the water?... I have been trying to figure out where and how (The manual is really confusing) I found a black plastic valve under the boiler on the right which reads...

Would like to clarify........... Is a sand to cement mixture of 6:1 definately the correct proportion that i should mix to lay as base? I found a 850 kg bag of SHARP SAND (assuming that sharp sand is the right type) from wickes...

Hi, Im laying an approx 15 sqm patio in my garden and I have a few questions: 1. I have put approx 7cm hardore into the hole I dug which is approx 20cm deep, but it doesnt seem to be level and sloping away from the house. Will this be ok when I compact. Can i relevel once the hardcore is...