Search results

  1. M

    Which Induction Cooker

    Ah, I was all for getting one with touch control, but hadn’t considered the safety aspect you mention, so thanks for that...I’ll go for knobs. We’re just replacing the cooker rather than the whole kitchen, so while I take your point about separate hob and oven, in our case I need a cooker that...
  2. M

    Which Induction Cooker

    I am in the process of removing our old gas cooker and want to repalce it with an induction cooker (note, a cooker with oven and hob, not just the hob). I gather some models pulse the magnetic field circuit on and off to regulate the average heat input to the pans, while others use the more...
  3. M

    Wiring new feed from CU to electric cooker

    yeh, all of that. I’m normally happy to pay for work that I’m incapable of doing. Having had a lifetime career as a professional in electronics, brought up through the electrical enginnering route, it just frustrates me to be forced to employ others for work I can easily do. I know, I’m at that...
  4. M

    Wiring new feed from CU to electric cooker

    Thank you, John, for your very quick and clear reply. Yes I am competent to do the work, but wasn’t aware of the notifiable aspect. Sounds like it would be cheaper to get an electrician to do the work than do it myself.... At least I can prepare the route, wall chasing etc to minimise the...
  5. M

    Wiring new feed from CU to electric cooker

    Hopefully an easy question...is it acceptable/legal for a homeowner in the UK to install a new power feed from CU through to a new cooker in a kitchen provided that it is then inspected and approved by an appropriately qualified electrician?
  6. M

    Pyronix Enforcer v9.12 manual(s) for Keyfob

    Now then....progress. As I stated at the start, we've moved into the house and inherited the Enforcer system, so it's been a learning curve. It came with two keyfobs, and in theory everything functioning correctly. When I found the keyfobs not working, with totally flat batteries. I purchased...
  7. M

    Pyronix Enforcer v9.12 manual(s) for Keyfob

    Yes this is the keyfob I have. Did the nvm reset....but....still the same situation :(
  8. M

    Pyronix Enforcer v9.12 manual(s) for Keyfob

    I Have this version of Keyfob (manual capture attached) but no mention of red and green flashing together. However, I have checked then installed a brand new battery as you suggest, but with no change in the result!
  9. M

    Pyronix Enforcer v9.12 manual(s) for Keyfob

    Navigated to the "Add New User", then to "Enter User Code" Then on keyfob: Pressed and held down Lock & 2 button for 10 seconds.................led on fob flashes fast green for a couple of seconds, then flashes fast red/green Released both buttons...............................led off for 3...
  10. M

    Pyronix Enforcer v9.12 manual(s) for Keyfob

    Ah, moving on, learning on the go. I was using the engineers menu, and should have been using the master menu. So, now I'm in the right area. So, I get to the "Add New User", and select an empty location, then press "Yes". The system then asks me to "Enter User Code". The manual then says to...
  11. M

    Pyronix Enforcer v9.12 manual(s) for Keyfob

    I'm having more basic issues in even getting to the right menu item. The manual suggests pressing "D" then enter the engineers code. This does nothing after entering the code, it just sits there. However, by NOT pressing "D" and just entering the code, I do go to the engineers menu! I can then...
  12. M

    Pyronix Enforcer v9.12 manual(s) for Keyfob

    That was the first thing I checked, and yes, they were dud, so I replaced them. Once replaced I tried to follow the manual to re-link, but failed to find the appropriate menu item.
  13. M

    Pyronix Enforcer v9.12 manual(s) for Keyfob

    I've moved into a house with a Pyronix Enforcer v9.1 with appropriate manuals, but the firmware installed is v9.12 The keyfobs do not respond, and I'm trying to relink these to the base unit. However, the v9.12 menu structure is different enough to not match the printed v9.1 manual I have. Does...
Back
Top