Search results

  1. S

    Insulated Plasterboard For Solid Wall

    Cheers, for that u value i need is like 72.5mm-- 60mm insulation 12.5mm plasterboard. Any makes you can recommend? Was looking at celotex PL4060. Do I need to tell building control? Cheers
  2. S

    Insulated Plasterboard For Solid Wall

    I am doing up my rooms and looking to re do the plaster i have solid walls which are really cold in the winter. So want to keep more warmth in my rooms. Was looking at putting insulated plasterboard on the walls that are exposed to outside elements. Is there any building regs that it...
  3. S

    Saunier Duval Experts

    Do you know how much that would cost from saunier duval or can corgi bloke do it?
  4. S

    Saunier Duval Experts

    Hi all I have a Themaclassic F30e and the problem i am having is that the hot water to my bathroom and kitchen hot tap doesn't stay hot for very long. Is there a part that need's replacing? Or is it worth maybe thinking about getting a new one? Thanks for the help and advice. :D
  5. S

    Need advice on Lintel or RSJ for load bearing wall?

    A support for wall above as shown in next picture Wall above in bathroom Kitchen at moment load bearing wall at end. Any info on what need's to be done for that part of wall? Cheers :D
  6. Untitled

    Untitled

  7. Untitled

    Untitled

  8. Untitled

    Untitled

  9. Load Bearing Wall

    Load Bearing Wall

  10. S

    Need advice on Lintel or RSJ for load bearing wall?

    Yes mate some of outbuilding walls need patching up and new plasterboard everywhere and insulation
  11. S

    Need advice on Lintel or RSJ for load bearing wall?

    What sort of cost is a SE? Or seen on Internet company's that do the beam calculations with info and drawings etc for like £50 is that any good down that route? Cheers for the help and advice
  12. S

    Need advice on Lintel or RSJ for load bearing wall?

    Hi all Doing a kitchen refit and the end wall we are planning to knock through to our outbuildings just to make kitchen a bit longer as width only 2.25meter wide. The outbuilding which at the moment is toliet and old coal store so getting bricky in to take that all out and raise height of...
  13. S

    Moving Boiler to different location + Hot water not very hot

    Hi all just in the process of having a total kitchen re fit. My saunier duval f30e is upstairs in a cupboard of main bedroom and is quite noise when in use while in bed. Was looking to get moved into the kitchen what sort of cost would this in tail to get a corgi bloke in to do? Also my...
  14. S

    Painting Composite Door

    hi Robbie there is a small dent that has gone through composite front is there anything you would recommend to fill and sand then paint?
  15. S

    Painting Composite Door

    Hi everyone Looking to repaint my composite door what's the best way of going about this should I give it a light sand with say wet and dry? Then just use a satin exterior paint? Thanks for any advice[/b]
  16. S

    Response Alarm Problem

    Hi All I have just moved into a repossession property and need to reset my alarm but don't know old codes as can't contact old owner. So can anyone help with reseting the system i can't see any model numbers but have put up some pictures to hopefully help. Kind Regard's Paul :D
  17. Untitled

    Untitled

  18. Untitled

    Untitled

  19. Alarm Photo's

    Alarm Photo's

Back
Top