Search results

Not sure. If there is a block would it be in the shower valve that ii can get a plumber to look at?. If it was a block, wouldn't the water still be hot as I only have it turned to hot. Not sure if the shower has cold coming out when it's just turned all the way to hot.

my plumber quit but did most of work. however, the water in my shower is only luke warm and i only have it turned to hot all the way around all my other water in hot taps are red hot and pressure fine, it's just the shower. It was ok first time i used it but second time i used it i turned...

well the latest from Vaillant is that the pressure should not drop to zero if it was not enough gas supply as you'd still get some gas.. Vaillant now said it might be the guvnor so I've called Transco out... another Vaillant person today said it could be the gas valve.. sending me round in...

Hi kev. They did the test at the meter. It was 22 on the meter and went to 21 when hob switched on. I think then when boiler switched on. It dropped to zero. They are testing a 22 straight from meter to boiler tonight bypassing the hob. If that doesn't work. I'm guessing it's a blockage...

AgrEe with jordan.. Vaillant mad did get them to check the valve for the joining materials but that was clear and vaillant man also got them to check the meters gosvenor.. I am going to get them to tery and check for blocks tomorrow. I think it's at the boiler.. And the courier dropped the...

Blue moon. From what I remember yes.. There's a 22 at gas meter then it disapears under two rooms and I can't ell what size and then it appears at 22 at the hob. So today the plumber split this at the hob and put 22 to boiler and the pressure still dropped to zero. Anywa tomorrow they are...

Promise I'm genuine.. Woman that knows nothing of boiler and never been on a forum before. Just at my wits end. It's cold and had no hot water for a week! What's a troll?

Blue moon - thanks.. The bloody pipes from my meter is 22 but then goes under my floorboards which are laid over chipboard so-kkd have to rip my floor up.. I can see though that it's still 22 and goes to the hob so -km assuming it's a straight run off 22 but obviously if it has a nail in it I...

I'm flattered. I work in marketing for a mobile network and knew nothing about boilers since I had this thing fitted last week. I'm nosey and curious and don't like it when I don't know what's wrong. I know I don't know what I'm talkking about but I'm not stupid and logic tells me it isn't the...

thanks Bellair... The gas goes from meter to the hob then to the bolier. My old boiler (not combi) worked fine and the hob works fine. Could a blockage be in that pipe as maybe the hob and old boiler didn't need much pressure so I never noticed there was a problem? I don't think...

they were talking about changing all the pipe to one inch which will cost me a fortune and wreck my house.. am I still going to have the problem? it's hard with these people as I don't know what I'm talking about you have to take their word for it..

think it was about 21.. I know nothing about boilers but from what I've listened to these guys over last week.. I just don't understand how it drops to zero.

Just had a Vaillant 831 installed..Installer having problems and vaillant said it was gas. Error F28. Bear with me as don't know much about this but it's bugging me. There is 22millbars of gas at meter and drops to 21mb when hob is turned on so guvnor is ok. However, at boiler pressure is...