Search results

  1. K

    Need an external lighting PIR immune to flue exhaust

    As the title says - I have GJD D-Tect PIRs for my DVR, which work brilliantly, but it seems that this only works with their own lighting system which seems over-the-top for me. Is there any similar working PIR that can work with any garden lighting, that will not be fooled by boiler flue steam...
  2. K

    Smoke alarm siting - 300mm "lighting"?

    Hi, I have a ceiling light that has a wide "bar" to hold 4 GU10 bulbs, two either side of the ceiling rose, the total width of the light feature is about 1m. Keeping in mind the 300mm minimum distance of a smoke alarm from a light, does this mean the smoke alarm CANNOT be sited <300mm from...
  3. K

    Ethernet requirements for Ring Elite Doorbell

    Hi all, I'm planning on buying the Ring Elite for my new front extension project. I already have Cat5e to the front for my existing CCTV camera with PoE, so two pairs already used up from this one cable. I'm hoping that the Ring Elite only needs two pairs too, so I can use the remaining two...
  4. K

    Vaillant EcoTec Plus 831 - Heating flow temp remains at 50 degs

    Hi, In an effort to raise temps to at least 20 degs in the home, I have increased the target flow from 75 to 80 degs with no success, and the actual "heating target flow temp" value remains at 50 degs. To give you an idea, from 11 degs it has taken so far 9 hours just to 15.5 degs. Have also...
  5. K

    Cannot register new app on Pyronix Cloud

    Hi all, Had been using the Pyronix Cloud App for some time now on an iPhone 5s without any problems, until I upgraded to an iPhone 7s. I have installed the app on the new phone, and having set up the configuration I get a message to contact my system administrator before I could use the app...
  6. K

    Question on ER (Area FX) for Pyronix

    Hi, Quick question: I have a front door contact set to Final Exit, and a lounge PIR set to ER (Area FX) as a route to the panel. If I open the front door the entry timer starts, and the lounge PIR detects my movement but does not trigger an alarm as expected. If the lounge PIR is triggered...
  7. K

    485 Bus error when wiring Pyronix PCX LCDP keypad to Enforcer

    I'm installing an additional keypad to my enforcer32-WE as follows: Panel > Keypad ----------------- D1 - >>>> 12v - D2 + >>>> 12v + D3 >>>>> D3 D4 >>>>> D4 I've gone into ASSIGN KEYPADS on the panel and set to ADDRESS[0] (only have one key pad) and set the same on the external keypad. When I...
  8. K

    Pyronix Enforcer - bell not sounding during Test Siren?

    Hi, I have the latest Pyronix Enforcer Homecontrol+ App v2.1 panel, and just received the Deltabell Plus sounder. I have wired it up but it needs confirming if correct, but both the backlight and strobe lights flash, but when doing a siren test under Engineer Tests menu, the strobe and...
  9. K

    Pyronix Enforcer - cannot get "Confirm Group" to work

    hi, I have a shock sensor on a window and a pir in the same room, and I wish to trigger an alarm activation only when both detectors are triggered. I have set both inputs to "Confirm Group [01]", left the default 30 mins setting for Confirm time between detectors, and armed the system to test...
  10. K

    Hardwiring Elmdene sounder to Pyronix Enforcer

    Hi, I have an old Elmdene sounder that was on the house when we moved in, and I have bought new Pyronix Enforcer-32WE panel and I'm trying to wire this up to Zone 33 on the panel. The previous panel is a Scantronic 9751 panel, there was a Tamper Return (TR) connection which corresponded to the...
  11. K

    Pyronix Zones - programming the entry routes

    Hi, I have the Enforcer panel, and have set the detectors as follows: Zone A - Downstairs detectors, inc front door entry/exit contact and Hall and Lounge PIR where I would cross to get to the panel B - Upstairs detectors C - Shed detectors I have set the front door input to 08 FX (Area ER)...
  12. K

    Pyronix MC1/Shock-WE (combined shock/contact): does it have 2 inputs?

    Hi, As in the title, does this product use up two wireless inputs on the panel, and if yes, can you manage each independently of each other? For example, if I fit this onto the front door, I want the door contact to be Final Exit/Entry Route, but I want the shock sensor to trigger an output...
  13. K

    Suggestions for outdoor PIR to trigger lighting and CCTV/Alarm

    Hi. I have a hikvision dvr with alarm in and outputs, a gjd elite external pir to trigger the dvr, and a pyronix enforcer with wired/wireless inputs and four programmable outputs (app enabled). My objective is for the gjd pir to trigger an output on detection to 1) turn mains external lights on...
  14. K

    Help and questions on setting up wired PIRs to Pyronix Enforcer

    Hi, I have the wireless enforcer with Homecontrol+ App v2.0, and a Euro ZEM8 hardwire expander that I just bought. I have wired a pir DEOL with 4k7 alarm and 2k2 tamper and returned back to the expander. The panel recognises the pir opening and closing the circuit, but there is no response when...
Top