Search results

Hi. I need to cut a couple of round holes for pipes and a few holes for shower screen door screws, into 9mm porcelain wall tiles. The diamond drill bit sets (for round holes and screw holes) that I've seen (for a reasonable price at least) are all round shank and I have a hand tightening hext...

Hi. I'm prepping our bathroom for new flooring and some minor plumbing (moving waste to below floorboards) so have lifted ply to get a look at floorboards and found this layer. Looks like a combination of adhesive and material, stuck onto floorboards, comes up in pieces with a scraper but not...

Thanks - good thinking - will take a look

OK, thanks - suspected that would be the case but thought I'd ask on the off-chance... Totally agree about the bonkersness of it being tiled in the way it is :rolleyes:

I've got a toilet with concealed cistern - can access from above but would need to break tiles to get under or to remove the cistern. Flush button and valve are Dudley vantage pneumatic dual flush. I need to replace the button, and am looking at other options for both button and flush valve -...

Thanks Doggit. So are you thinking several normal wood screws vertically up through the top plate of the wall and into the lower edge of the worktop? Would going in at different angles give extra strength (a bit like toe-nailing with nails)?

Breakfast bar wall by longbloke23 posted 5 May 2016 at 10:02 PMBreakfast bar wall by longbloke23 posted 5 May 2016 at 10:02 PMBreakfast bar wall by longbloke23 posted 5 May 2016 at 10:02 PMHi. I'm after a steer on how to fix some wood block worktop onto the top of a stud wall partition so that...

Hi One of our radiators has stopped working. I've removed the TRV and checked the pin which looks fine - pushed it in and out a few times to make sure it isn't sticking. That hasn't helped. Pipes leading away from the radiator on both sides are cold. Any thoughts on what else I can try...