Search results

https://www.tapmagician.co.uk/NSAboutIdentifyValve.aspx

Live is fed to the immersion through the thermostat, then the incorporated overheat stat then the additional overheat thermostat. From what you say I think It is a new thermostat that you have fitted The additional overheat stat keeps tripping. Seems that this additional stat is tripping at a...

I believe that no. is a 15mm compression so this would be your man https://www.screwfix.com/p/flomasta-compression-stop-ends-15mm-2-pack/65021 It could be that someone has removed the nut & olive & screwed the 1/2" thread directly into a female fitting in which case you can put ptfe around the...

Will be ok as long as it doesn't droop down & back up again as this will collect condensation.

Then plan A is certainly possible. If you have a combi boiler many manufacturers insist on a mini ev being fitted. It is often a failing ball valve that causes noise problems or a dripping 1/4 turn tap. You could try pump up ev to 1 bar then turn mains back on & see what pressure the ev is...

The lower fascia panel will pull off. Usually pull upwards to detach it from the lift off clips. This will give you much better access. You may have room for a second ball valve in the cistern but I have no idea how you think that would help.

I would first of all Turn off water and open tap to release pressure. Attach compressor/foot pump/bike pump to shock arrestor and pump up to 3.5 bar. Turn water back on and see if problem has gone away. Check that your stop tap is open all the way and back 1/2 turn

Usually not aa problem but sometimes they resist.

Clean the seating before fitting the new ones and a smear of silicone grease never hurts. If they are not a common size, tapmagician has an 18 sheets of A4 list of dimensions to choose from.

You could always fit one of these, blended supply to wc and set it to about 20 degrees. Would draw mostly from the hot pipe till temperature achieved and then continue to fill cistern with mostly cold. https://www.screwfix.com/p/flomasta-thermostatic-mixing-valve-15mm/684fa This will be full of...

Start with the easy exposed one. Run shower till body is hot, usually on left hand side. Run a not so hot tap. Cold water flowing through the shower will rapidly cool the LHS of this shower. If it is not this one then you will have to repeat by pulling the faceplate forward on the concealed...

Is this internal or external?

:LOL::LOL::LOL:

It will be a temperature controlled mixer so shower mixer not basin mixer. While running a not so hot tap you may hear something if you put your ear to temperature control knob. If they are exposed valves the temperature check by feel will be easy but if they are concealed and you can access the...

Could be a faulty check valve on a shower. If you run one of your not so hot taps and then wander around and feel your shower valves is one of them particularly cold?

Waste hose should go up to underside of worktop then back down to connection point in order to stop sink waste back-filling washing machine

The valves at the manifold are both closed

You can't glue polypropylene. Is that elbow glued on or just pushed on? Your sink bowl base looks quite close to that elbow. I would start by assembling the sink trap kit that you have shown and then seeing height difference from trap outlet to elbow. You look to have enough pipe behind the...

If it is clicking at 40 C then it suggests that stat is OK so more likely the heater element breaking down when hot.

I am confused. Your drawing shows trays in right hand corner of both rooms yet shower waste is in left hand corner? Your swept tees appear to be facing the wrong way