Search results

Switch is not faulty. I took the cover off the fan.....and in the end, the 'neutral' was a switched live to the timer module in the fan. All back to normal and working as before. Thank you to all of you who made suggestions, helping me narrow down the issue! Take care.

Thanks for the responses so far. I have popped Earth into a terminal now. I've used a voltage detector, and it only detects live on the 2 cables (live in and mirror) in the wago. Nothing on what is neutral (blue) or on the brown wires I have found to be for the lights and fan. Maybe the...

Hi All, hopefully someone might be able to help. Usually I am pretty good, and take a photo before I do anything, this time I didn't and it is biting me in the ass. Bathroom pull cord snapped completely from inside the switch, undid it, and in my head it was all brown cables in one terminal...

Anyone?

Just printed, there is no line or anything to suggest a cap comes off.

Exactly that.

No, nothing on tap head at all

Hi all Some advice please. I have a Scudo thermostatic mixer to control 2 way shower and it no longer adjusts for cold water. Is it a valve adjustment or replacement cartridge needed perhaps? I've taken the handle off, photos attached that might help identify root cause?

Thank you Terryplumb. Yes, there is a constant drip when both are off. I'll try the heat trick and if not just replace it all. Thanks again for your time and advice.

Hi there Wondering if someone can help identify how to remove the handle from this kitchen mixer tap? Tap is leaking so I wanted to tighten / check valve etc. I can unscrew the collar to expose parts of the valve, I've tried pulling at the handle and no luck, no caps or hidden screws either...

Thanks Sparkymarka, i managed to get the engineer code, so it's sat in installer mode to stop the infuriating beeps. Will replace battery and hopefully all be ok. Thanks for your response, all the best!

Hi, given the time of day, I'm awake due to the constant on / off beeping from the 9940 LCD panel, control unit is scantronic 9651. Now I've been on a few forums, and if I knew the code to enter engineer mode then I'd at least be able to join rest of my family and get some sleep....but I don't...

ok, thanks for the input so far. Will look into the timberlock screws. Can someone recommend a method of connecting the fafters to the end posts and horizonatal timber? At the moment in order to provide a bit of an overhang is to use a birdmouth cut??

yes, the rafters!! sorry, wrong terminology, was just using the name given to the timber by the supplier I intend to purchase from........

If I bolted the two end rails to the face of the posts unless I then cut the tops of the posts in line with the pitch of the rails then I would end up a straight lip at the open end......

Thanks for the reply foxhole. Maybe my quick (not to scale!) sketch will help clarify. I also have no idea whether brackets are availble to fix all this together i.e. like some form of joist hangers or something, or just screw the wood together. I'm also not sure at the open end...

Hi, if I have some timber (150mm x 47mm x 3 meters long), and I intend to fix it between two 75mmx75mm posts. Will I need to install a centre post? This is basically the open end of a lean to that I intend to build.

Hi all, thanks for those of you who replied, replaced the brushes and all is well!!