Search results

  1. T

    Vaillant EcoTec plus power/gas flow range rating setting below 100%

    Hi, Since installation few months ago my Vaillant EcoTec 418 never exceeds ~75% gas flow according to the display. This is annoying because the boiler takes longer to heat up and does not operate at max efficiency even from starting from dead cold water. I asked Vaillant Vaillant said that there...
  2. T

    Boiler Annual Service Check "Sys inhibitor check [..] in accordance with BS 7593"?

    Hi, Reading my Vaillant 10yrs Guarantee T&C and the benchmark logbook requirement. There is one record check "System inhibitor checked in accordance with BS 7593"; - How this check is done - How much does it cost / is it included in the service charge fee? Many Thanks
  3. T

    What tool for garden fence Postcrete demolition?

    thanks, but can I hammer on its head?
  4. T

    What tool for garden fence Postcrete demolition?

    Hi, I am repairing a fence by fitting a new concrete spur flush to the old wood pole that snapped underground last winter. The pain is digging out soil around the rotten wood pole down 60cm; I managed to remove some of the old postcrete with Bolster and hammer, but there is some left about...
  5. T

    How to close/plaster a deep hole in the wall

    thanks, do you mean no rubbles / stones in the mix? I can only find postcrete being used for fence holes in the ground rather than on vertical interior wall?
  6. T

    How to close/plaster a deep hole in the wall

    yes the wall was too messy, the installer had to put a wooden board underneath
  7. T

    How to close/plaster a deep hole in the wall

    Hi, I want to plaster over a rather deep hole by the new boiler. What's the best practice / building material I do need to use? The two holes are quite deep (see pictures) and wondering whether / how I can procure some rubble and stick on the wall with rapid cement, let it dry and plaster over...
  8. T

    Hire traders with Company registration number?

    Hi, I want to hire a trader to supply and install a window. I found the trader on Mybuilder and the company name is on Fensa site. They sent a quote asking for 50% deposit so I checked the gov.uk website to see if the company has a registration number but I could not find it gov.uk. Hence...
  9. T

    prevent tree roots from clogging sewage drains

    thanks I just watched videos about roots killers with foaming agent - it seems one has to apply the chemical every 12months.. I was hoping the chemical would kill the roots for good.. ? If this is the case I would probably take down the tree and kill it with
  10. T

    prevent tree roots from clogging sewage drains

    Hi, Tree roots get in the sewage drain (see pictures), causing a blockage (loo paper gets stuck into those thin roots). I am cutting them regularly (every six months) but it's smelly so I want to resolve once for all. Options are: 1. fell the tree 2. spread some chemicals into the roots but...
  11. T

    Buy a boiler online and get gas engineer to install?

    Yes but need say two weeks to clean numbers. HW only atm hence lots o variability for length of shower and cooking. Please remind me in three weeks if I haven’t posted yet..
  12. T

    Buy a boiler online and get gas engineer to install?

    .. correct me if wrong but I read your post on 3rd party EEBus adapters for Vaillant .. I would be interested doing something similar as I'd like to better control my S-plan .. did you eventually fit / tested your EEBus controller?
  13. T

    Buy a boiler online and get gas engineer to install?

    Hi, I eventually selected an installer and had the boiler fitted and tested. It took about six hours for one GS person. Although the price could have been a couple hundred quid less, I didn't risk it and went for a more expensive company in the manufacturer's "master approved" list. The boiler...
  14. T

    hot water cylinder by-pass valve replacement?

    Hi, I sorted it.. did proper measurement from cold using IR thermometer and the bypass keeps 10C difference in/out which is suggestive of no flow passing..thanks for your responses:)
  15. T

    hot water cylinder by-pass valve replacement?

    Thanks; the red valve was there before TRVs were invented I think, so must be a std feature of S plans. My concern is that the stuck open bypass prevents full flow to HW cylinder making it inefficient. I always operate HW on when CH is off via stat and electric 2 ways valves.. If I replace it...
  16. T

    hot water cylinder by-pass valve replacement?

    Hi, My S-plan has a by-pass valve (common plegler gate valve) that seems incapable of closing the flow (see red circle of the diagram). I tried to close it completely, turning until the end but the output pipe did not get colder, at touch seems the same temp as the input. I suspect some crap...
  17. T

    Buy a boiler online and get gas engineer to install?

    .. so are all GS registered also VAT registered? ..
  18. T

    Buy a boiler online and get gas engineer to install?

    Yes, that’s when you pay someone with banknotes instead of online bank transfer right?
  19. T

    Buy a boiler online and get gas engineer to install?

    Don’t know, what’s the difference reg or not reg on daily price?
  20. T

    Buy a boiler online and get gas engineer to install?

    Eventually I have been quoted £500/day inc vat install with warranty. Still higher than plumbers daily rate of £290.. wondering why this difference..
Back
Top