Search results

Well i'll get that sorted tomorrow cheers mate

fluid master looks similar but not the same, so should do the job I asume. Many Thanks

Hi sorry mate, it's a new toilet only 3 or 4 years old, no ball valve and the inlet valve is 11inches from inside the bottom of the cistern to the top of the valve. I can dig out the make of the toilet if that helps. Cheers Rich

Hi all, I have a utility room to paint, the outside wall of this room is actually underground, they have had continual problem with this room and last year had the outside wall which is underground, dry lined with insulated plaster board. Not long after we painted it efflorescences and dark...

Hi, all of a sudden my toilet has started to refill itself really slowly and is making a hissing noise, I asume it's a faulty inlet valve, my question is are the inlet valves that you can buy in B&Q etc universal ? It's a bottom feed by the way Cheers Rich

Just to throw a spanner in the works you say it's chalky and it burn your skin that would suggest lime wash to me or distemper, have no idea how old your house is but if it is the new matt paint that is peeling off the old coating then there is a chance it is lime wash. If when you paint it the...

Ok just had a response from Crown and they said. "We would recommend you sand the area first then de grease with methylated spirit then apply 1 coat of Aluminium Wood Primer to stop the stain bleeding through then overcoat with a Gloss." That 2 for Aluminium primer.

hang a picture over it you will soon forget it

I've used zinsser all coat but it aint pure white, more light grey/blue, can be tinted though.

If you want an exterior eggshell finish try sikken satura, I'm pretty sure dulux weathershield comes in a satin version to, as for colour almost any trade center that mixes it's own colours will mix you up a F&B colour, but they will have to put it into white rather than a base, so it will not...

Alright Guys, I've got a staircase to paint, spidels, handrails, etc, are finished in a rather tired looking mahogany woodstain, probably waterbased. They want it white gloss apart from the handrail which have to be stripped and stained a light oak. Obviouly I want the paint finish to be as hard...

thanks mate i'll give it a little tweak

Hi all I've just recently bought a dewalt 18v cordless circular saw, only thing is i noticed that the riving knife doesn't line up exactly with the saw blade and I always thought they were supposed too. It's only out by a couple of mm so I can probably bend it to a little to line up but I don't...

Well I thought it was rather odd too, I couldn't find a transformer on sale anywhere with 14A sockets nor could I find 14A industrial socket, so i assume they don't exisit, so I've just peeled the label off that says 14amps on it and underneath it says it's a 16A doh. Why would anyone do that...

Hi all, sorry if I'm not in the right place with this post but I could do with some help. I have an 110v dewalt mitre saw and today I decided to buy my own site transformer to go with it, so I can give back the one I’ve been borrowing off my mate for the past year. Anyway I spotted one on eBay...