Search results

Your search - chs model eo37 hair straightener spares - did not match any documents. Try googling that and see what answer you get smart arse!

Can anybody give me the correct technical description for a swivel cord lead as used in women's hair straighteners to prevent the lead from getting into a tangle, so that I can google it to try and find a site that sells them, as I am having no luck.

Would it be OK to use homebase masonry paint to touch up paint on metal drying green clothes poles which have already been painted with proper exterior paint but I ran out of, and I have just noticed bits I have missed? :oops:

Can brass (or plastic) numbers be safely attached to this type of door with screws or must they be stuck on, and if so with what please? My reason for asking this question is that I was under the impression that PVCu doors were hollow inside and would not be strong enough to take wood screws.

quote "are you saying the double switch is on the inside, directly on the other side of the wall to the outside light and is the cable terminating behind the switch?" The twin switch plate controlling the outside light and the light at the bottom of the hall is on the internal wall at the...

There is an old hideoous bulkhead light outside my front door that I would like to get rid of, but keep the wiring in place in case at a later date when I am in better health I could replace it with something more modern. I would also like to be given the alternative option of what would I...

My 6 year old Hotpoint TCD80 condensor TD has been performing extremely well (except for the mechanical noises mentioned), until last week when it tripped the 30amp RCCB or RCD once while running at the hot setting and then was perfectly OK for the rest of the time it was used. A week...

Can anybody who owns one of the above models of Hotpoint washing machine please tell me the capacity of the inner drum? We have just bought a new Bosch 7Kg washing machine and the struggle and strife maintains our WM76 Hotpoint had as big a drum as this and I totally disagree with her. It...

Thank you for your quick response. Where should I look for the heater bracket please, and by grey powder, can I take it to mean you are referring to the dust deposit I have spoken of which was lying at the back of the machine? I can state that this residue is lying underneath the centre...

My Hotpoint WM76 makes a metallic noise on 1000 and 1400 spins as though something was striking the chassis in time with each revolution of the drum or near enough! This is the only time the machine makes a noise! It is not the drum bearings, and it is not the spider starting to...

ban-all-sheds Thank you for your continued assistance. Much appreciated! I had looked at the B & Q site you have highlighted as a possible source of a lamp, and you may have noticed that all of the lamps illustrated are marked with a red cross as being out of stock. I tried a search of...

Had a look at the fitting in daylight from ground level and the lamp is completely black along its full length between the terminals. Does that mean it has burnt out, and all that is required is a new lamp or could that be a symptom of something more serious? I can't even source a lamp...

I hate to say it, but I have got to agree with you. The fact that the first pir lamp I bought from them had to be returned after two days proves this :oops:

I thank everybody who replied to my post. The chances of me looking at the lamp now are even less as we have had a fall of snow during the night! However I feel a lot better now having been told that there is a good chance that it is only the bulb that has blown. What drew me to remark...

The PIR I fitted at the back door will not come on. It has worked perfectly for just over a year. (Notice how these things happen just after the warranty runs out.) I cannot extend the ladder to climb up and have a look at it just now due to health problems and the extreme cold, but I can...

I did what you suggested and it worked a treat. I was able to open and shut the valve without any trouble. Now here's a strange thing. A few hours later it was as tight as ever, which coincides with the central heating being on, but surely that should have no bearing on it whatsoever...

Thank you kevplumb. Will do this after leaving WD40 on overnight.

For some reason that I can't understand my 27CDi Worcester Bosh does not have the filling system shown on the installation instructions, which denotes that the system is filled using a key. I am totally familiar with this as it was on the boiler in my last house, which was a 24CDi. The...

What a twisted sarcastic person you are! Does it give you a kick to put people down? What's wrong did you put your false prosthetic on the wrong leg this morning? But then I remember I have had dealings with you before! I'm only running a table lamp off the socket, not a 1000 volt...

When I got new central heating in I utilised the connection where the old boiler thermostat in the kitchen had been by converting the outlet into a socket for a table lamp etc. Problem is it's only rated at 5amps on the fuse board. My question is could I run a 500 watt rice cooker from...