Search results

  1. T

    Minimum brickwork width from wall starter to door opening

    Surprised there is no guidance. Think I'll maybe just stick to the same 780mm as per the corner to keep BC off my back
  2. T

    Minimum brickwork width from wall starter to door opening

    Hi. I understand that there is a minimum brickwork width of 780mm at external corners to openings (if cavity of 100mm) - but is there also a minimum distance stipulated for walls adjoining existing brickwork tied in with wall starter kits to openings? For additional info the wall is a non...
  3. T

    PD - Single Storey Rear Extension with Flat AND Pitched roof. A PD loophole ?

    Hope its allowed - as its exactly what I'm planning on doing! My eaves height will be 3m - but this only gives a ceiling height of 2.15m due to outside ground level. So planning on a very small pitch exactly as per your drawing to gain an extra 250mm of ceiling height.
  4. T

    Reconfiguring 2 X toilet and 1 X bath outlets

    Good point well made!!
  5. T

    Reconfiguring 2 X toilet and 1 X bath outlets

    Thanks for your help / advise Madrab - much appreciated Another option I thought of was this pan connector with a 40mm boss: https://www.drainagesuperstore.co.uk/product/bent-90-degree-pan-connector-with-boss-inlet.html And have this installed on the ensuite WC and run the bath into. But unsure...
  6. T

    Reconfiguring 2 X toilet and 1 X bath outlets

    Hi I need to move my existing external toilet and bath outlets due to having a rear extension built and they foul the roofline. After advice / opinions on my preferred option which I have included as a sketch. My main concern is: 1, If I'll need air admittance valves and where they need to be...
Back
Top