Search results

Had a room painted by a decorator a few years back... at the time he struggled with crazing, so in the end papered over and then painted over the top... paper pealing in places so time to redecorate. Want to go back to paint, no paper... Removed the paper and can see the crazing, i'm guessing...

Oh yeah :) I'm sure there is still plenty of work for plumbers!

Thanks all! Got it off and repaired tap. What did we ever do before the internet. Cheers

So the chrome cover should just lift off if i put a bit of upwards pressure where the join is?

Thanks... cap off it was the screw type... My problems not over though... Please see the pic... Any idea how i expose the tap cylinder? Cheers

Hi, Sorry, bit of a dumb one. Please see the pic... Anyone know how I get access to the washer without destroying the tap (washer has perished)! Thought first part would be to remove what looks like a cap on top of the tap but that doesn't seem to budge when i get a knife blade behind it. Any...

Hi, Had a bedroom decorated about 8 years ago by a decorator before we moved in. He said at the time that the emulsion kept bubbling up when applied, so gave up and papered the wall then put standard emulsion over the top. The paper is pealing in places and its time to redecorate and I would...

I will give it another go... i know from the first job I did, it had 3 coats and I gave up in the end... Wondering if its the roller? The thing is, most people probably wouldn't really notice... looking at it head on it looks fine... just looking for the perfect finish I guess!

Dulux Trade Vinyl Matt

It was two coats.

Hi, Painted a couple of walls white (different rooms) recently and at a certain side view angle you can see what look like roller marks (See pic). It looks a lot worse when looking at it when natural light is flooding in through a window at the other end. Any thoughts? Cheer.

Went with Zinsser and really easy to apply. Only thing I would say is it was a little difficult to emulsion over in places, needed lot of coats. Next time would put a couple of mist coats over the top of treated area before 2 full coats of emulsion. Cheers

It's probably as good as it can be... small bedroom, exhaling all night and a cold wall. I'll check the zinsser range. I was wondering about this also 'ronseal condensation paint'

HI, Decorating a small bedroom this weekend. The bedroom is at the corner of the house and I can see some black mould in the exposed corner and around the window. There are also some runs in the old paint work above the lintil. The walls of the area in question are pretty cold so its got to be...

Good idea... As you say though, getting it to bond will be the trick.. But if I can get it to stick enough, then when dry acrypol over the top paying special attention to the seams it might be ok. After all, it not got to hold back a tide, just the odd drip if that.

You mean use acrypol as an adhesive to stick a patch of new felt in place from the underside and then paint over acrypol to finish off? or perhaps use the acrypol mesh instead of felt?

Would flashbanding be any good for the job with the felt surface primed before hand?

Cheers... Better repair the rips and holes (not vents though)... hhhmmm... How to fix gritty perishing felt from the underside?!? Could be one to pull your hair out on..

Hi, Was doing a few bits in the loft last weekend and noticed the felt has perished in a few places (house built in 1977), with a few holes/rips in the felt. There are also a couple of vent holes that someone has previously cut in the felt. Yesterday, it rained hard all day, with a strong wind...

If it has been there since the house was built in 1978, I guess you could describe it has faded black.