Search results

Daniel, Do the extra pictures help at all? Regards.

stardanny, there's another valve at the tank, see pics. the only visible pipework is what you can see at the boiler and the tank, if there's anything else i can do to help let me know.

Thanks for all the help so far. twgas, i set the programmer to fully pumped and put CH on but boiler did nothing. stardanny, not sure what you mean by wiring centre (sorry), if you can point me in the right direction i will get some pics which might help, have taken a few more of the...

Thanks Dan, The horstmann programmer install book shows the following 3 wiring diagrams for fully pumped systems. Any ideas as to which one i need and what wires would need to move where from how its wired at the minute. Many Thanks.

Hi, Looking at the pics would someone be able to tell me which type of CH i have, just moved to a new house and I have a Hortsmann centaurplus c27 programmer which looks to be set to gravity fed, meaning i cant have CH and HW on individually, I have the jumper switch to set it to fully pumped...

No leaks, pressure has remained constant, job done. Cheers.

Called Alpha, don't know why i didn't do it earlier, they sent an engineer next day, opened boiler and replaced air vent(?), i could see that inside the boiler it had been leaking and due to the heat it was evaporating almost immediately, no issues so far but i guess i will know in a couple of...

Anyone offer any advice on this one? Thanks.

Sorry, I'm still not 100% sure what you mean so i've taken a pic, could you point out to me where these isolating valves are. Also, in the picture where the arrow is pointing there is what looks like a brown sticky coating on the thread, any ideas what that would be, also got some leakage...

Dave, Any tips on how i do this? Cant see anything that looks like a valve i can turn off, any pointers appreciated. Ta

Many thanks for the replies, appreciated. OK so i've had no leaks from the bathroom radiator for a couple of days but the pressure is still dropping, assuming i have no leaks in the pipework or radiators is there anything which could be awry in the boiler which would cause a loss in pressure...

Thanks for the reply Tony, I'm not questioning your expertise but if only a few drips (and i mean a handful over the course of a week) can cause this to drop of 1bar why is it that when i have to top it up it sounds like i have to put litres of water back into the system? I just find it hard...

Hi All, Been through many different posts but not managed to resolve my problem. After being topped up to 1 bar I need to refill after approximately 7-10 days. Got an Alpha CD28C with the premierpack, no leaks at the rads, been under the wooden floors and no leaks in the pipework, no air...

I have some damp patches in the corners of the ceiling and on the walls of my loft, i've had a look out through the velux window and taken a few pictures, there looks to be gaps in the lead flashings in places like the lead has shrunk and it looks to be corroded, not sure if this is the cause...

i have already used a mr muscle drain unblocker as i thought there may have been a blockage further along the waste pipe due to the fact that the drain pipe wasn't covered during the work i had done, i had tiles removed from the walls along with black lime and i thought some dust\debris may have...

Hi guys, No match for my problem using the search facility so here goes. Had my complete bathroom replaced recently, all ok apart from shower enclosure waste, i bought one with a built in hair trap, with the shower running the water just about drains away with a little build up, but once i...

maybe, i wouldn't know, im not a corgi engineer. he could tell me anything...

DP, how much would you charge for this? Is there anyone in the Halifax area on this forum who would be able to offer the name of someone who they know as trustworthy who would provide a service\maintenance of the standard of that offered by DP, i still have my leak.... many thanks.

I wish i could say the boiler hasn't been serviced for a while, but it was done 3 months ago. Are you saying that my boiler hasn't had what you would consider a "proper" service? Should i be calling up the company and asking them to revisit? Garya