Search results

Thank you for your reply. I will break the tile and extend the pipe Thank you

Hi all, I'm going to cover my wall tiles with 10mm shower panels. This means the pipes on my shower mixer need extending 10mm. Can I use a pipe extender connection to extend the pipe? Photo attached. Kind regards Dave

Thank you Stuckinarut

Hi, can anyone tell me how to open a Horstmann HR2 thermostat, as there are no screws on the casing? I would like to replace this for something more modern also, if you could tell me which please. Photo attached. Regards Dave

Thank you

Thank you for your advice

I've just put new flooring down and flexi pipes are about 5mm short to connect tap connector. The flex hose is 300mm and I think 400mm will be too long. Will the hose stretch 5mm ?

Thank you oldbuffer for your advice. Can I extend them and reuse?

Hi, can anyone tell me how to remove push fittings as I have just layed new floor and now they need taking off and extending. Photos attached. Any advice will be grateful. Regards Dave

H

I live in Milford Godalming

Thank you all for your advice. I budgeted for a £1000. I live in Surrey if anyone knows who can do it. Regards Dave

Hi, can anyone please tell me the cost to remove and brickup an external door? Regards Dave

Thank you all for your replies

Thank you so much for everyone's help. Can you recommend what brand to buy?

I've always had 15mm connectors to a mixer, but this dog leg has a 15mm in the wall and looks a 22mm connecting to the mixer. All the mixers I've looked at seem to be 15mm. I'm a little confused.

Hi, the connector going to the mixer looks like 22mm and the connector in the wall looks like 15mm. I thought that all connections where 15mm. Can you get a 22mm mixer connection?

Hi, I'm replacing my bar mixer control and I don't know what to get. I've replaced similar before, but have always been connected using an olive compression connections. This one is screwed directly onto the pipe. Any help would be appreciated. Dave Photos attached

The supports around the edge is timber

Hi Madrab, it didn't have feet, but it had a riser kit. I will attach a photo of the timber supports. The tray was was supported around the wall and the base of the tray was on the floor. Any advice please of what to buy. Regards Dave