Search results

  1. N

    Samsung washing machine

    I have seemed to work out if I drain the filter via the hose after around 3litres the pump will kick in and everything is fine?
  2. N

    Samsung washing machine

    Hi, I have a Samsung ww10t684dlh/s1 washer that WAS amazing.... Now it often wont spin, it will wash as normal then when it gets to the spin cycle it will sit there and occasionally rotate a bit but never build up to a spin. If we drain some water out the drain tube it will spin. I have...
  3. N

    Any point in over-speccing BTU vs. what is required?

    OR bang in a 27x45DC and be done then go to the pub
  4. N

    Any point in over-speccing BTU vs. what is required?

    In the time you have over engineered the simplest of jobs I could have fitted the system!!! = Combi sized to suit hot water forget about heating unless you live in a mansion normal house anything from 28-35kws will be fine = Any rad valves will be fine you aint on a one pipe system (I hope?!?!)...
  5. N

    Can expanding foam be used on a cold spot

    Sorry to explain better. The new wall that has been built in what was the garage door space is really cold to the touch (the internal plasterboard) it also seems draughty. My idea was to drill through the outer (brickwork) into the cavity at regular intervals and squirt foam into the cavity...
  6. N

    Can expanding foam be used on a cold spot

    We have a coverted garage and around the window is freezing compared to the rest of the room. The builder put cavity battons in but just under the window it still seems cold. Is it possible to drill a hole in the outside leaf and squirt foam into the cavity in a few places OR will this cause...
  7. N

    Fernox TF1 Magnetic filter - it's awesome

    Fitted over 100 tf1's and tf1 minis......... oooops 12-18months later around 20 leaked, mostly from there seem where they put together.
  8. N

    Fresh Plaster, do I need a mist coat?

    Just had a room boarded and skimmed, do I need to do a mist coat? If so can I buy some cheap white emulsion and mix with water to do it with as I am using expensive paint (thats grey) OR Can I just go for it? Im using Dulux endurance Cheers boys!
  9. N

    Beko XL9 washing machine, fills then empties

    Hi I have the above washing machine and it has been great then today when trying a cycle the washer. Fills as normal - Clunks - Empties the water. No washing is performed Any ideas peeps?? TIA
  10. N

    wiring a water heater

    The original is already wired into a fused spur my plan is to remove the old heater and flex and put a new longer flex into the existing spur. Just through me a bit with its terminology! Thanks!!
  11. N

    wiring a water heater

    Electrical connection Please observe national standards, the regulations of your local electricity supply company as well as data the rating label. Wiring diagram (Fig. 9) 1 Ground cable connector 2 Signal lamp 3 Thermostat 4 Temperature fuse with reset funktion 5 Heating element 6...
  12. N

    PU Foam Spray under baths and showers

    ha ha ha ha ha ha ha ha ha ha sorry but.... ha ha ha ha ha ha ha ha ha ha That is the worst idea I have ever heard!!!!! Please do video the results. Bare in mind the foam will go in a holes so under floors etc. Im thinking you will need to install the bath on legs anyway before...
  13. N

    Lukewarm water from cylinder

    Cyl stat broken/turned down
  14. N

    Good new toilet?

    Yep the 6 ltr "eco" flush that requires you to flush the WC 3 times to work!!!
  15. N

    Good new toilet?

    High level cistern! WHOOOOOOOOOSH Done
  16. N

    Anyone ID this flush

    http://www.screwfix.com/p/fluidmaster-push-button-cable-dual-flush-valve/51173 Get a universal one
  17. N

    Cost of new gas connection?

    the £3k one i mentioned was just 4m from the gas main under grass so I would be amazed if £200 is the price! £200 Digging/making good PE pipe and fittings Meter and meter box AND Labour Not sure that will be true
  18. N

    Cost of new gas connection?

    £3k was the last one I got, but would completely depend on circumstances (distance from gas main/pipe route/local pricing etc) I have heard of a quote of £3million to supply a cu-de-sac round here too!!!! :shock: Long way from gas main
  19. N

    Inspection hatch for pipe?

    http://www.wickes.co.uk/Wickes-110mm-Black-Soil-Access-Pipe/p/431969?CAWELAID=120135120000015432&CAGPSPN=pla&utm_source=google&utm_medium=cpc&utm_term=&utm_campaign=Google+Shopping+-+Building+Materials&tmcampid=104&tmad=c&tmplaceref=&tmcustom=mkwid|pDInpiPa_dc|pcrid|43364522812|&gclid=CjwKEAjw4PC...
Top