Search results

Another month's water under the bridge (or down the drain) but just an update from me... my CDI 1012 has settled down into a 'faulty but usable' state. On an eco wash (program 3) it goes through the whole cycle but falls at the last hurdle, which I think is the final 'heat to dry and then pump...

Hello Dario Sorry to hear you also are still having problems. I agree, if it comes to the fault being down to the electronics module, I will not be spending 120GBP to replace it (as you say, with no guarantee). Certainly, the resistance reading of the heater element sounds 'within tolerance'...

Hope you manage to fix yours, Dario. My problem hasn't actually gone away, but I think the motor pulsing was possibly a red herring. Using the machine on eco wash (P3) it no longer pulses, but doesn't complete the wash. It almost gets there, but stops near the end and P3 LED flashes fast. The...

Before performing 'up and under' surgery, I decided to try running the machine, mainly to observe operation of the water softener now I could see the brake-tank. I set an Eco wash (P3 - the one we normally use); it filled, rinsed (no 'pulsing'), drained, then re-filled and the water softener...

Ah, there it is! - behind the right hand front panel... The service manual refers to is as a "water softener capacitor". However, I can't see a "flow meter" - there are no electrical items attached - it's just a plastic tank. There, is, however, an electrical connection...

Candy CDI 1012 service manual p6

Filter basin & water softener

Right hand panel removed

Well, I've had a good poke around, but can't find a 'flowmeter' or 'braketank'. I took off the LH side panel (lots of sneaky screws there trying to stop you doing that) but didn't find anything interesting behind it. Then I removed the lower front (black plastic) panel and found all the...

Front lower panel removed, filter basin & level switch etc

Left hand panel removed

Photos of machine interior

Hello Zipper, many thanks for your response. The model number is CDI 1012-02 and other numbers on the ID plate are 32900034 0505 2049. I have checked the filter (clean) and the drain hose and sink spigot; I have run the drain hose directly into a bowl (to eliminate any problems with the...

Hi Dario Yep, sounds like the 7 year time fuse has gone :cry: I'm hoping someone will come up with some advice for us both. It certainly seems a popular machine - sold widely and still in production. Have you tried the "self test"? (posted by Zipper in answer to other problems with the...

I have a Candy CDI 1012. The machine is coming up to 8 years old and has worked faultlessly during that time. However, having set a P3 cycle to run overnight, on opening the door, the P3 LED was flashing rapidly and the machine had not completed the cycle (still full of water). I can't remember...