Search results

Roof Ladders. Maybe. Hire what you need. That wall along top could stop the roof ladder? You can hire a tower scaffold as well

Shut windows and curtains keeps it cooler. Make sure you have insulation everywhere possible. Run air con in one room normally just in the evening.

I thought bitumen was a bad idea as it seals wall trapping moisture. Breathable paint is what you need. Might already have bitumen on?

0 to 5mm sizes I think. Look it up online for grading size

Here is another

120 grade sandpaper yeah. This was a thick artex ceiling I skimmed. A bit patchy. Just how it is.

Good quality PVA to glue. Helps stop creaking. Two of these makes it easier. Hire or eBay https://www.toolden.co.uk/p/faithfull-faifc-flooring-clamp/?gad_source=1&gad_campaignid=17670233719&gclid=CjwKCAjw87XBBhBIEiwAxP3_A5srJJ34EFdh7ETWXFiQi7rZaDqVkaJ5mWkg0piXRpMyrMFQtWIX0xoCxbgQAvD_BwE

Oh. Maybe you have to look in electrical cupboard for key power off switches Vs in rooms. I have one site like that. And you have to test water once a month for temperature

In our offices. Green light means it charging. Turn lights off at switch. They are now all off in the room. Then you should have a testing switch with a key to turn off power on the wall, so now count the emergency lights that come on. If you have 3 emergency lights then you should see 3. This...

Might have a few areas that need a wipe with 120 grade and maybe a little toupret filler in any dings or nicks. I think they say 7 defects per room max when skimned. Think I had a few more that that most of the time if I'm honest. Skimming over existing walls can cause a few patches and some...

Fit these. They are sound operated so when the fire alarm sounds they release. If there is noise like someone clapping could also release the door sometimes No you should not wedge door open...

Buy the same colour in Johnstones eggshell. Has a bit of a sheen at around 10% Or Zinsser Perma-White Interior matt tinted to match if you want a matt. Think I'd go for the eggshell

Scratch up the area back to plaster. Use a tile primer to seal surface

Condensation is your problem. Less of a problem this time of the year with the warm weather but you need to try and control that.. You have cold walls and the moist hot air is hitting that causing condensation. There are paints that help stop the condensation forming on the surface but not the...

Do you know why the paint has blown off? Any damp being sealed in as it's lime render or it it stone chipping on cement?..

Just not a good idea to use contract emulsion. It's only ment for new damp walls. No vinyl in it ( PVA) If you are applying with a brush it must look terrible I'd want to dustless sand that smooth. Prime walls with something like gardz. Get a quality emulsion with a 15inch or bigger roller and...

Have a dig. Artex which is white. Plaster is pinkish. Looks more like plaster to me. Doubt that has asbestos in but you may want to get it tested if it's white artex. Scrape and skim is your best bet. There are wall smoothers you could use then vacuum sand or even learn to plaster yourself.

The wooden blocks are glued down then sanding flat with a floor sander. Then the wood is treated. I don't know how the floor would be soundproofed with a surface ready to stick blocks to. Soundproofing is all or nothing. You need to install the correct system. You need to ask the flooring...

Clean and try a patch. If it stains through then you will need coverstain tinted to match. Don't use off the shelf white

Decking paint is your best bet with that discoloration