Search results

In the event we went with TalkTalk 900mbps The cable is oval approximately 6mm x 3mm Thanks again for your help

That would account for it then … the person who told me dealt with internet landlines rather than fibre installations

Thanks, I’d been told it was oval and 2 core. There is some of that type comes up in Google when searching for full fibre cable.

Thanks, I’m wanting to prepare the access in advance of the installer arriving. Is the cable round or oval ?

Can you tell me the physical size of the cable that goes from the Open Reach pavement ducting to the Customer Splice point? And do they use the same cable from the Customer Splice point to the new Fibre Modem, in our case about 15 metres away on the outside brickwork then through the lounge...

Problem solved, Saniflo continues to work as it should.

You wrote ... I have 20yrs experiance and you have ZERO I read the previous Saniflo questions before posting mine, so I already knew you had a vast knowledge of Saniflo systems, and even more so since you have pointed out it stretches over a 20 year period. You are taking offence at me saying...

I’m sorry; I’m trying to be as courteous as possible. Is it me saying it will fail to operate the switch before it leaks that’s upset you? Please let me know if I’ve missed something, rather than leaving me to figure it out Thanks Ray

Thanks for the Red Hermitite suggestion JP, it was the perfect sealer. The diaphragm is much more likely to stop operating the switch before it lets water into the electrics. Thank you again for your help, Ray

Thanks JP, there was a fine layer of sealer on the diaphragm from new, is there a need to replace it with anything?

Thank you Eric

I concluded the diaphragm has been "drying out" over the last 25 years becoming smaller and less flexible, not allowing the plunger to fall away from the micro switch. After heating the diaphragm with an hair dryer and massaging it with WD40 it appears to work perfectly normal. Just need to...

Thanks JP I was trying to find out if they normally fail in this manner?

Our Saniflo has been failing to stop automatically for some time, just a gentle kick would solve it until recently when it would run forever. Stripped and cleaned and removed the diaphragm. Found the micro switch works as it should until the diaphragm is replaced - permanently compressing the...

My neighbours are managing with this until they have the heating system renewed… Thank you for your help. Ray

Thanks for that Terry I'll copy it to my phone for future reference.

I don't think it will fire up for CH only unless latched but I'll check it again in the morning. When you sat "latched open" Terry does that mean with the lever hooked over the step and locked in place? If so, where is the valve diverting water to when latched? My neighbours son who lives...

Thank you very much Terry, if there are any other tests I could do them tomorrow.

Sorry Terry I had gone round with out seeing the unlatch instruction

It was all stood on timed - turned the HW to OFF and the CH to ON and the boiler lit up - turned the room stat down the boiler stopped - turned it back up and the boiler started - just like you would expect ! The actuator would still have been latched from earlier.