Search results

  1. K

    Need help with broken 3 pin replacement

    Hi everyone I received the pin but have to no ida what wire to attach to N and L There is no marking on the wires What’s the worst thing that is going to happen if the wires are attached to L and N? P.s. I don’t have any device to check the wires
  2. K

    Need help with broken 3 pin replacement

    Hi everyone, I bought set of photoshoot lighting tripod and the pin is broken as my friend tried to force it in. Any chance I can replace it? doesn't matter if it's not fix into the box. I will isolate the wires properly. sadly i don't know the technical name for it so couldn't find anything...
  3. K

    Need help Restoring and protecting Danish teak wood

    Hello everyone, MY sister asked me if I can find a way to restore and protect the teak coffee table which is attached. As you can see, the bottom piece looks quite preserved and all shiny and nice but the top piece looks worn out with lots of cup marks. What would be the best treatment to...
  4. K

    Need help with Branding on wooden bowl

    Just spoke to them. They only supply the machineries. No service. I will only need one bowl. Might have to go with flat iron then. Any other laser engraving company you might know of? Thank you
  5. K

    Need help with Branding on wooden bowl

    Thank you. Thank you sent them an email. Hope they can make curved iron plates as it's going to be put on bowl
  6. K

    Need help with Branding on wooden bowl

    Hello everyone, I would love to have something similar to this bowl for my brand but I have no idea how. Is it heat treated? or stamp? What would be the cheapest and most convenient way to do this? If possible , can someone guide me to a company or someone that would do this ? thank you
  7. K

    Need creative solution for lifting goods

    Thank you for all the help. Very interesting puzzle. I will get the pulley. Will test the beam beforehand.
  8. K

    Need creative solution for lifting goods

    It won't be heavy items. Maximum 50kg.
  9. K

    Need creative solution for lifting goods

    Hello everyone, Recently build an office space above the freezer. I need to move stuff up and down. Instead of using ladder, I was thinking about hanging out a roller and rope (picture attached) through the beam on the ceiling. So I can pull the rope and lift the goods and have a hook fixed...
  10. K

    Need help with wire spec- Cold room

    It's 16mm 3 phase and the brown is the live wire. Told the neighbour but he seems quite relaxed about it. It already ate through half of the protector. It's matter of time before we have a firework there. I separated mine from that box. The MCB were old from federal electric and needed mcb on...
  11. K

    Need help with wire spec- Cold room

    Thank you For all the information. I hope I can contribute to this forum somehow in future. Went for 4mm 5 core. A bit expensive a my £150 but peace of mind. Also putting a switch just before the freezer Found this in box and I think it's quite dangerous how it's been done. Don't...
  12. K

    Need help with wire spec- Cold room

    I found an electirican who is coming tomorrow. He is suggesting 5 core 2.5mm will be fine As there are only 4 bends and 40m routing. While here it's been suggested a 4mm cable Power consumption 2566 W each phase. Current consumption 4,3 A each phase. The refrigeration spec is attached for...
  13. K

    Need help with wire spec- Cold room

    Thank you for the help. I will go with 40m 2.5mm 4 core SWA cable and cleats. I will not touch the box or do the insulator. I will have the electrician do that. I just route the cable across the wall.
  14. K

    Need help with wire spec- Cold room

    Hi the cable will be clipped to wall, I guess uncovered but it needs to be armoured as it's in warehouse environment. Not buried in the ground. Will be passed by edged of the wall around 3 metres from the ground.
  15. K

    Need help with wire spec- Cold room

    Hi everyone, I'm having a cold room being installed on Thursday (Spec sheet is attached). They are coming to install the unit on Thursday 4th. The wiring hasn't been done yet as I recently leased the place. The unit need a 3 phase electricity. No electrician is free to do the routing so I...
  16. K

    Shutter door extension help

    Hello everyone, I need to remove the ramp beneath the shutter and therefore the shutter and guide needs to be extended. I got quote from two companies well over 500. I even told told them I will remove the ramp and make the surface ready for you. They are charging too much. I was wondering if...
  17. K

    Help with cable size - not using FCU -hood

    Thank you for prompt replies. Ok. Ive asked the tenants to provide images. Basically, the connection unit that is available is on other side of the kitchen( the cable will travel around the kitchen safely out of reach)which is exactly same as the one visible in the photo. I have asked them...
  18. K

    Help with cable size - not using FCU -hood

    Hello everyone, There is a kitchen extractor fan with the wire exposed and unattached (photo attached) There is no booklet. By looking at the photo, would you help me by saying what cable size is that? I need to extend it by 9m to connect it to another socket( not FCU) Is it safe to connect...
  19. K

    Need help with Waste&Trap replacement-bad smell from U s

    Hello Rob, I am looking forward to hear from you about the parts I need in order to change the whole system (screwfix) I am leaving the property in 3 days and need to have it done for tenants to move in :) Thank you for your consideration
Top