Search results

I'll pull it down mate I don't mind a bit of mess thanks for the help

Great, the other option I guess would be remove the old lath and plaster off and then reboard so it runs into the wood but I think youre saying that the stop bead would do the same thing?

Afternoon, I'm just curious what type of finish would be best for the plastering of the ceiling where it runs into the wood from the staircase landing section in the picture? Plan was to have that skimmed but I'm not sure how it's gonna look and how it ties into the wood. Please see pic

No, bother ive finished it now, I connected the pipe in the pic between the 2 gullys

Hi , just back on with this issue as I haven't got round to it yet. I have bought another gulley and ideally would just like to connect a piece of terracotta pipe from the outgoing socket of the new gulley to the spare outlet on the existing gulley. However once I've dug down I can see the...

Yeah I'd seen that but wasn't sure if that was allowed underground where it wasn't accessible,.I've also seen the black rubber grommets as well which looks even easier.

Hi thanks for the reply, it's a plastic pipe , does the same apply

It's all one system

Cheera for the reply, it's the front of the house so I'd rather not see the downpipe running horizontal across to the other, the inspection chamber is full , from a building control point of view am I ok to do what i suggested?

Hi , can I put a t piece in the terracota pipe and connect from that t piece with some 110mm pipe into a rainwater gulley to take that 68mm downpipe? I have a mixed drainage system so it all water goes into that main manhole but unfortunately all outlets are utilised

Hi cheers for the reply, it's solvent weld but I haven't glued it yet as was waiting for some advice , just to clarify are you saying bring it out as it is or straighten it, all the joints would be inaccessible so not sure if I'm better leaving it and just taking a Flexi pan connector straight in ?

Morning, please can I have some expert opinions on the situation I've got with a soil pipe (see photo) Am I best leaving it straight and then using a Flexi pan connector to connect into the solid pipe as it is in the picture or would I best straighten the solid pipe and centering it with some 45...

To be fair I don't I'm just presuming it's not because the fittings are copper. It was installed about 15 years ago when we moved in and had the new bathroom fitted. I can't see any writing on the exposed pipes.

Hi, please can someone identify the type of pipe in the installation shown in the two pics I have attached. I can tell it isn't Hep pipe but my next question is can I use hep fittings so long as I use the steel inserts as I am wanting to extend the hot and cold. Thanks

Evening, I'm just after some opinions please from the pros on here that install lots of showers, I'm currently in the process of installing an en suite and am looking at a choice of shower, the 2 choices are a concealed shower or a column shower, I've attached a couple of pictures to show the 2...

Because there is a hot tub in there it will 12v fairy lights fixed to the plywood so the moisture barrier would definitely be continuous, cheers m8

morning, I have built an outbuilding to house an acrylic shelled hot tub , the roof construction is a warm roof , on the inside I planned on using a moisture treated plywood straight onto the ceiling joists, is this correct or would I need a barrier between

Evening, I need a replacement bolt for my magnaclean professional 2 , i can order from Adey but I'm just curious if this is an item that a wholesaler would stock or os there something else that can be used with the same sized thread. Cheers

hi, just a wooden deck

Afternoon. I've been getting a drip from my mira combiflow shower, I've attached some pictures of what I have removed and I'm wondering if I'm missing a washer or what is the obvious part that is faulty? The cartridge is a spare one that I have never used however I have put that in and it still...