Search results

  1. J

    Saniflo

    Hi can someone send a link again for a compatible saniflo again. Thanks
  2. J

    Fridge freezer high temperature

    Why would the gas need removing. Does it sound like a compressor fault.
  3. J

    Fridge freezer high temperature

    Hi I have beko asd241s with fault. High temperature warning light. Flashing 22 / 0 The fridge and freezer is just warm. I have turned power off for 48 hours and still the same leaving on for 6 hours. Both just warm. Any idea what it could be. Thanks
  4. J

    Replace back door gate

    Hi I will be replacing my back gate. Due to expansion of wood in winter how much mm would you recommend either side for expansion of wood. Thanks
  5. J

    Douche

    Hi I have fitted a thermostatic douche for a customer. Every time is used it takes 90 seconds for water to come out unless the temp is set on cold water I have tried another douche and does the same The system is a y plan system and all other taps are perfect The indirect cylinder has an...
  6. J

    Saniflo

    If I go with 400w does it matter if my old is 685w 400w looks like a perfect fit Thanks
  7. J

    Saniflo

    Thanks I will go with the 400w you first recommended Thanks much appreciated
  8. J

    Saniflo

    Thanks that perfect Out of interest the one I found wont that work. And does it matter if my old one is 685w and this one 400w
  9. J

    Saniflo

    Hi I have a saniflo which started making a noise and now the pump keeps running, I have tried the cleaner this afternoon. I have attached a picture of a replacement, will this work. Due to age just feel may be better to replace
  10. J

    Basin tap

    Hi Current tap is 162611 Planning on purchasing 162614 Says low pressure and gravity
  11. J

    Basin tap

    Thanks andy Can you send a link who sells low pressure taps. I have tried ebay unable to find. The only one that may work could be the Victoria taps due to having cartridges.
  12. J

    Basin tap

    Hi Just replace my basin and taps with mono mixer along with m10 flexi The hot water flow is poor If i remove the isolation and replace flexi with copper m10, will the flow improve My old basin worked great with 2 taps Any help appreciated
  13. J

    Waste fitting

    Hi Can i insert 1 1/4 coupling into 1 1/2 tee then solvent weld Or do i need to get a reducer Seem to fit ok
  14. J

    Yale alarm

    Hi just fitted yale alarm. If i wanted the siren led to flash every 60 seconds will the battery last atleast a year with good make batteries.
  15. J

    Shower pump

    Thanks wont bother
  16. J

    Shower pump

    Hi i have a twin shower pump that only increases pressure at shower Is there any way using the same pump to increase the flow to the bath by somehow linking to hotwater outlet on cylinder I have an indirect cylinder
  17. J

    Thermostatic mixer shower

    That what i have bought but manual state use s connector Thanks for your input much appreciated
  18. J

    Thermostatic mixer shower

    The manual state s connections must be used I would have prefered not to used the s connectors What would happen if not used
  19. J

    Reqs joiner to fit 4 internal doors

    Hi Anyone in bolton to install 4 internal doors Locks/doors and hinges supplied If intrested pm me with price Thanks
  20. J

    Black water from rads after drain down / inhibitor + other questions

    Have you payed for a flush or just a drain down Why did you call him out for
Top