Thanks. I'll speak to my neighbours and find out.
Houses were built in the 60's.
Unfortunately I don't have any details other than it runs from...
I assume that is expensive?
Are main water pumps any good?
I don't know the mains pressure but the flow rate is 6 litres per min. This was calculated using the cold tap located directly by the...
Having an extension and an extra shower will be added.
We currently have an old potterton 24 eco combi boiler with a mains flow rate of...
We have been required to do this. Left side being the garage.
The plan is to insulate the studs with celotex, add then I think 12.5mm of insulated plasterboard with the foil in for the vcl.
The builders are...
It seems there are some that use them and some that don't. In my case building control require it and as far as I can gather it...
Just a quickie. If you are studding out a single skin garage and you have block, breather membrane, studs from out to in. Which way should...
This is the layout. The floor is concrete as its from the original garage,
I think we are going to use the existing SVP for the new bathroom...
Thanks for your help.
Building regs allow you to remove the gully and connect a stack to it?
Also going to need a saniflow for the downstairs...
If ok can i pick your brains again please.
Work has started and not really a good first day. We are trying to locate the manhole in the...
Builders don't worry, that privilege is left for me :)
Hi sorry yes this is in the building notes on the application to building control.
All sorted I hope.
Building control are happy with
Fire resistant board
150 studs with 100mm insulation
Thanks. Going to chase up the architect today.
Having read a few bits over the weekend and taking on board the comments here what would be wrong...
No probs. What provides the fire resistance on the inside? Or does one board like 6mm supalux provide enough.
Just reread Woody's post and yes...
Can you provide a link?
Who regulates private building inspectors?
Have read enviroboards are a cheaper alternative. No idea how true that is though.
Thank you Woody.
Yes it is within 1m of the boundary unfortunately
The building notes I have specify 90mm celotex between the 150 studs.
Quick and easy. For a timber frame first floor we need 6mm fire resistant board like Supalux to provide 30 mins protection.
Separate names with a comma.