Search results

  1. F

    Dishwasher feed hose with two angled ends.

    Hello, has anyone ever seen a dishwasher feed hose with a 90 right angle at each end before. Or would it be easy to make one.
  2. F

    Retaining wall

    Cheers I'll have a look at dry stack walls never heard ov them before. Also seen tyre retaining walls which could be a cheap way of doing it.
  3. F

    Retaining wall

    Looking for ideas and suggestions for a retaining wall in my garden. Its 15m long and 0.5m high I plan on putting a fence above this probably just a wire fence. I was thinking of sleepers or gabion baskets but wondered if there was a cheaper or easier option out there. Any advice welcome.
  4. F

    Heat transfer fluid in wood stove.

    OK thanks, I'll pick up some regular inhibitor tomorrow.
  5. F

    Heat transfer fluid in wood stove.

    I have 10 litres and was just going to use that in the system. Not fill the whole lot with it. 6 rads.
  6. F

    Heat transfer fluid in wood stove.

    I have some fernox HP-5 heat transfer fluid my mate gave me, would it be ok to use in my wood stove central heating system - radiators, pump. Or would I be better with the regular inhibitor for central heating?
  7. F

    What to put behind wood burning stove?

    Sorry having trouble with photos. Can't really move the stove due to the flue, pipework and hearth. Whats wrong with the steel idea?
  8. F

    What to put behind wood burning stove?

    I was thinking the sheet of steel would just cover up the cracks and look nicer. I'll have a look at the insulation board. Looks like it would be a bit of a squeeze as its 25mm thick.
  9. F

    What to put behind wood burning stove?

    Hello, I've had to remove my stove to replace the boiler (the joys)! So I may as well repair the cracked and blown cement render that was behind it. I only have about 20mm space from the stove pipes to the render. I'm not keen to re-do the render as it will probably crack again and I don't...
  10. F

    Solvent based silicone on PVC panels

    The manufacturer that I got them from doesnt specify either way, however I found on another manufacturers site (similar if not same product) that they use solvent free stuff.
  11. F

    Solvent based silicone on PVC panels

    Hi, I am about to fit some 10mm PVC panels around my shower bath. I was going to just use sticks like sh to fix to the wall and dow 785 silicone to seal round it. I then read somewhere that solvent based adhesives and silicones can have an effect on the PVC but I can't find the article again...
  12. F

    Recommend an Immersion heater?

    Never had that problem with the last one, the stove heats 6 radiators too so the tank never gets boiling. Never seen one like that Roger928, where did you get that?
  13. F

    Recommend an Immersion heater?

    Thanks, its not a hard water area. Terrywookfit can you elaborate??
  14. F

    Recommend an Immersion heater?

    Hi, I need to replace my broken immersion heater in my vented hot water cylinder. It is used occasionally to top up the hot water along with my wood burning stove. Can anyone advise on a particular brand to get?
  15. F

    Help with choice of bath taps.

    Think screwfix actually have a lot of these taps.
  16. F

    Help with choice of bath taps.

    Thanks dishman. What about nationwide stores anyone? Most of the websites I look at have a ridiculous postage to where I live in scotland so I don't like giving them any business!! Plus it means waiting around for delivery & possibly having to take time off work. Just noticedThat Site Bath...
  17. F

    Help with choice of bath taps.

    I get a decent flow to the basin which has ye'oldie taps that screw round and round. I would just buy the same again but more modern if it means good flow. But I don't know where to buy such taps.
  18. F

    Help with choice of bath taps.

    All the pipework will be new so no valves and 22mm. How do you know the bore of the tap itself? Been Looking all day and was just about to order these, would they be suitable? http://www.screwfix.com/p/bristan-orta-bath-pillar-taps-pair/61255
  19. F

    Help with choice of bath taps.

    I wasn't bothered about temperature, more about flow from hot in a mixer being less than two seperate taps. I'm not sure if it would be but if anyone knows?
  20. F

    Help with choice of bath taps.

    Thanks, think I'll go with seperate taps.
Top