Search results

  1. K

    Identifying Plants in Photos?

    How do Forget Me Nots as young plants look so I don't mistake them for weeds? And is the plant in top photo Japanese knotweed? How about the plants in other two photos?
  2. K

    Widening space for washing machine?

    Just need to get washing machine to fit, don't worry about anything else and plumbed in
  3. K

    Widening space for washing machine?

    I'll do that 2 x1 baton butted up to underside while it's in situ. Then take out central dividing board. How would you support left hand side if left hand side support panel comes out? J and B said circular saw with a fine blade wouldnt cut the shelf properly. I guess he means must be a...
  4. K

    Widening space for washing machine?

    No baton, could one be fitted underneath the middle upright removed?
  5. K

    Widening space for washing machine?

    Got a shelf that has an unequal gap, shall I scribe it to side of panel and cut with a trend triple chip blade in circular saw(as recommended above) and shift shelf over so equal gap on both sides? Also the unequal gap running down side of panel on wall which wasn't scribe to wall, is there...
  6. K

    Widening space for washing machine?

    Baton running length of worktop in the wall at the back?
  7. K

    Widening space for washing machine?

    Ok so just take out central support panel like foxholes said. Perhaps some supporting baton at back. in circled photo both sides of cupboard (with euro hinges in) has holes all over. Can this be replaced or holes covered with a strip glued on?
  8. K

    Widening space for washing machine?

    The highlighted area in red is exactly 600mm (width of washing machine) so too narrow. Can the side on the right be moved to the right or small cupboard on right be made narrower to then accommodate the machine?
  9. K

    Hanging a narrow gate

    Router it out like a door hinge? So knuckles are in recess? Depth of knuckles or hinge? Looking at picture hinge, I reckon it will swing 120 degrees
  10. K

    Hanging a narrow gate

    I can get them built in under lap board, like current hinges. Do this or stick with current ones?
  11. K

    Hanging a narrow gate

    I So change hinges to hook and band and screw them in into middle of post(see pix)? (Post will be bolted in and touching the corner of garage wall (wall facing us on right). Should swing all around and have a hook hold it open on wall on right
  12. K

    Hanging a narrow gate

    Ý Hook and band hinges you think Like these-...
  13. K

    Hanging a narrow gate

    The gate's too small. He wants the 4 x 2 on wall facing the camera (to the right). The gap is narrow enough. Need to get 50mm added on. And will those hinges allow it open more than 90 degrees? I'll take it back to joinery, see if I can get them to sort it.
  14. K

    Hanging a narrow gate

    The skinny gate (gonna open towards the camera)-
  15. K

    Hanging a narrow gate

    I guess if there's any obvious problems I haven't seen
  16. K

    Hanging a narrow gate

    Privacy I guess
  17. K

    Hanging a narrow gate

    The gate's gonna open towards camera , hung off 4 x 2 bolted to render. Two sliding bolts into pvc opposite. Put another stop on hinge side. Gate already made at joinery
  18. K

    Making cardboard template for floor

    Can't get the size of whole bathroom if thinner though
  19. K

    Making cardboard template for floor

    Planning on changing my bathroom's vinyl floor also wanted to practice making a template with cardboard which could later be transferred onto wood. Figured cut it so it overhangs and is too big then gradually cut it down until it fits around toilet etc
  20. K

    Changing LED light's switch to a dimmer

    Found washer
Top