Search results

Hi PrenticeBoyofDerry Thanks so much for replying. Just to be 100% sure, I use the block connector in the photo (supplied with the fitting) to wire from the fitting to the mains cable and then use a separate block connector to the earth (and this block connector won't connect to anything)...

Hello I've attempted to fit a new light in my bedroom but the plastic terminal block wired to the ceiling is too large for the pendant to fit over. I attach photos and would like advice on how to wire the pendant fitting. The photo shows that the light comes with a terminal block but this...

Hi guys As you can see from the photo, I need to fix under each side of the bay prior to painting. What's the best way to approach and best filler to use? Should I have it skimmed? The cracks are caused from the settlement of the uPVC windows installed 4 years ago (I think that's the...

Thanks for the advice guys I went for Dulux Trade Eggshell in the end. I've put one coat on so far and it looks ace. It was really easy to apply too compared to some gloss and satin finishes that I've applied in the past. How do you tell if you need a second coat? Mikeinthemidlands

Hi, thanks for the reply. Yes I suppose I could use eggshell. Can you recommend a brand which has the lowest sheen? What's the Dulux Trade eggshell like? Thanks Mikeinthemidlands

despite reading lots of posts on here and looking around the various DIY sheds, I've not managed to find a suitable paint. I've seen Johnstone's Trade 'Flat Oil'. Would this do the trick? The walls have been painted in Dulux Trade Flat Matt and I'm looking for a similar finish on the...

Cheers for the responses guys. I think I will install trickle vents though to cut down on the condensation. Any tips on fitting these? Do I need one vent per window and I take it these should be installed at the top of the frame in the centre? Cheers mikeinthemidlands

No, to be honest the windows are never open as the other half always complains about the cold! I was thinking of installing trickle vents on each window? Worth considering do you think? mikeinthemidlands

Hi guys Please could someone take a look at these photos? Every window in my house gets condensation along the bottom and up the sides of the windows on the inside. A few windows in the house it's also outside too. The windows are only 3 years old. No washing left to dry on...

Thanks for your advice Woody. I will just insulate under the bay as although the surrounding wall is quite cold to the touch - I've not seen any condensation/mould. Mikeinthemidlands

Hi all This is my first post - I have been lurking for a while reading some very helpful threads. I would be grateful of some advice on how to tackle insulating under a bay window in my bedroom. Under the bay there's a stud wall (3x2) covered with lath and plaster but no insulation. The...