Search results

Thanks mate. Just seen triple Sockets with 13a fuse so may even use one of them now

Right to clear this up this is what I’m looking at doing please see diagram I have made... So I plan on plasterboarding the fireplace out. I will fit a 13a fcu at incoming 2.5 twin and earth location (orange x). Then run 2.5 twin and earth down and into the centre behind fire into a double...

So plan is can the current 2.5cable for socket be wired into a 13a fcu with switch then run that to a socket behind the fire. The fire wont be fixed and will plug into the socket with tv and fire place

Heater

Erm well there is only one set of wires going into the socket so does this mean it’s a spur ? 2kw tv. Above the opening

Hi please see pics, I’m in 2 minds best way of going about this, so I have removed a single socket and an old light from chimney. I will plasterboard this area out. Plan was to put in a MF junction box with wagos and run 2.5 down to the bottom centre behind the electric log burner. All clipped...

Hi sand cemented it tonight used some wood with oil on to partition it how long before I can move the wood please

Hi mate, that’s pretty much what I’m going to do. May need two of them what you said, it’s 900x350 and about an inch deep. Was gun use some sbr neat paint that on then level with the cement. I have some laminate under lay with damp proof in and lay that then lay the slate floating it’s a heavy...

Hi there, Have a heavy slate hearth to lay. Have already floored it and it’s only housing a electric fire on top so no issue. Want to bring the level up about an inch level with floor and just lay hearth floating which I don’t see being an issue. Stuck on what’s best way of going don’t think...

Have u got pics

Yea sounds like gypsum on top of lime. Same as in my house plenty of cracks, the gypsum doesn’t take the greatest onto lime and will get plenty of hairlines over time. Maybe the damp has contributed towards this Exterior brick walls will have been original lime plaster which are designed to...

Surely should be plastered in lime not browning ?

What year is house

Have used hammertoe to do a rad and never had a bad finish like that, what brush did u use

Hi, and with the new pull cord just make sure that I get the commons correct and as long as I get the blacks to l1 on both switches and the reds to L2 on both switches I should be good ??

Hi looks like intermediate switch has been used but not needed as only 2 light switches Switch says intermediate marked 1-4 Thinking I need a normal 2 way but unsure on wiring it with them using the intermediate switch

Hi can anyone tell me the best light switch to use on this please I believe it is different to normal 2 way switches says intermediate and numbered 1-4 Can’t find identical switch so thinking normal 2 way switch as pull cord is in room as well which I will replace, Guessing 1c is common? Then...

I appreciate your help thanks

So can I please clarify, if I fit the German bauberg calm 150 fan with pull cord and timer, am I ok fitting as it’s ip45 and suitable for zone 1 , is like for like installation into 3a fuse and also on a trip. I’m all ok with regs I believe?

Yea mate looking for a straight swap minimal work to be honest, want to work with what’s there. Have come across this version in chrome ip45 and also have humidistat version. Do you know if the humidistat version just needs wiring to the mains and will come on and off on its own ? Thanks