Search results

not thought of that. The tarred hard stand is next doors parking space. They can only park on that spot. The area I'm working belongs to my house. Bizarre I know. I don't mind hard work. It's the results that compliments front of house better

I want to make the front of my house more appealing. Attached are 2 photos of the front of my elevated house. In the photos you can see where I've removed sand and gravel left in pile. About 800 litres as I measured by filling 80 litre dustbin. What I'm left with is CLAY! Suggestions please...

Just fitted cold tap valve from screwfix. Screwed in well although bottom rubber seal washer is smaller than one removed. No leaks Thank you guys

Ok Terry so its the link Madrab gave? Screwfix

I've measured the thread of the valve. It's 2cm (3/4"). Hence why I'm confused by for the 'bath'

This photo is of cartridge I removed. 3/4" thread. So link you sent from screwfix is what is in this photo? If so it will save me removing the whole tap. Plus buying box spanners. One says for Basin 1/2" the other for Bath 3/4". Although mine is kitchen sink it's 3/4" so go for Bath?

Yes they're screw. I'll take a photo later. Thanks for your help

They have cartridges built in? Seals etc?

Good morning, Water isn't leaking from base of tap. It's coming from the cold cartridge. Trickling down the side when tap turned on then forming at base. I recently removed it to replace bottom seal as tap was dripping. I think its the top seal of the cartridge. Is this available to replace?

I turn on the cold tap. You can see it oozing water from the base. I'll check later..... thanks

Terry, I mop up water around base and then turn on water. You can see it leaking from base. Really bizarre.

Watch this space...I'll be back just in case I get stuck I'll examine the bloc to see if their is a fracture.

I think my set up has copper pipe tails.

Just got to get right size. Screwfix selling monobloc for 39.99

Smelly? I guess so

Tap was fitted 12 years ago with new kitchen.

I'll get a tap spanner and remove it all. Let's see what's going on underneath the tap body. I didn't think water could leak between body and sink I'll just investigate before deciding what to do next.

Seems really difficult to get at underside of tap. I guess you need specialist tools?

Hi guys, I had a drip from my Deluxe chrome monobloc tap. I fixed it by removing the cold tap side and replacing washer. Now water is leaking from bottom of base. Shining torch at base and switching on tap you can see water leaking from the base. I've attached a photo. How do I fix this...

Hi guys, I had a drip from my Deluxe chrome monobloc tap. I fixed it by removing the cold tap side and replacing washer. Now water is leaking from bottom of base. I've attached a photo. How do I fix this please? Thank you.