Search results

Laco Cool Gel.

Tend to use 57mm holesaw for strap on boss'

More information required. Type of dwelling, for a start, off gas network?

Stick with the classic.

Hey BD, do you guys still cover this boiler, but you stopped covering the 280 and 350, similar vintage aren't they.?

There should be a drain off on the opposite end of the radiator, just drain the system.

Your hot water is based on the 36kw, so therefore hot water flow rates are around 14lpm. Personally if you have the space go for the Worcester Bosch CLASSIC 38CDI. Its bigger and heavier than the 36cdi compact and bullet proof. Obviously flow rates dependent upon cold mains flow and pressure...

Maybe look at the Cheaper Ideal Logic derivatives, like the Ideal Instinct 30kw, or Ideal Independent 30kw.

Can't go wrong, with the Worcester Heat Only Boiler. Upto 7 year Warranty, basic boiler no bells or whistles but does what you want it to do. I like them, look after loads and fitted loads.

Well if all those jobs are next door to each other. Otherwise absolute *******s.

PRV?

Don't think its wired up correctly.

Is it actually over pressurising since you fitted the external expansion vessel, or are you loosing pressure slightly over the period of a week.

The guys probably tried to take a working or burner pressure reading, so it is purely coincidence the board could have failed again.

Get a vacuum cleaner, stick some 1 1/4 waste pipe as a nozzle, then loosen the mud and vac it out. You'll soon find the stoptap.

You've come to the right forum, this is the Intergas forum after all.

Relay knackered. Unless you have wired it up wrong.

Baxi Platinum for me 10 year warranty and cheap parts when it starts to breakdown, the Worcester CDI Compact is an overated and overpriced boiler IMHO. The case doesn't sit straight and bows, and clips in with some plastic lugs which break after after their 2nd year. The only decent boiler...

Have you been given a gas safety cert for your £90.00. Or are you being held over a barrel to get the works done before one is issued.

Be prepared to shell out for a new heat exchanger then. If the system was dirty as it sounds like it is, the waterways in the giannoni hex are tiny and block up very easily.