Search results

That will sort out the screeding compound sticking to the tiles.

What’s the levels like? Is it glue down or click LVT. You will need to do a moisture test on the screed and the ceramics area won’t have a effective damp proof course for glue down LVT

Did you pre screed thd old adhesive 1st with something like ardex na

It’s a High temp and has fibres so it won’t move at all. The best glue if any sunlight on the floor. F44 is decent but only use it for polysafe these days.

F48 plus is better

Love it. What a bully he was.

Halfway under the doorway. It’s called a door trim. The grippers go around the perimeter for the carpet.

You don’t get much heat with wire UFH through laminate as well. Carpets would be best.

You can put a fan on the glue to help it tack off

What notch is the trowel you have? Should be a A2

Get your border drawn out. Then dry lay the centre so you are happy with the cuts. Then glue down approx 1m2 in the centre and make sure it’s tight. Once that sets you can’t run out. Use f48 plus adhesive if possible as it’s high temp so good if any sunlight.

Yes as it sits next to grippers better.

9mm. Treadaire chromium is the best out there

Yes feather finish the whole floor then sand it

Yes mate. Leave a small gap everywhere. We do 3mm around everything. Yes undercut door jabs so LVT slides under

Just the bonding glues of the plywood is better. As long as you buy decent plywood. Not Chinese you will be ok.

No you want decent ply like sp101 or FG1 for LVT. Then glue 0mm Then LVT 2.5mm on Ave

That’s good. But free 25 years they perish. But anyway. You need to get as much up as possible. Then do a full coat of ardex NA / fball 1200 / or similar That looks like you have moisture suppressant on it. But needs to be an epoxy one.

Without seeing it I’d say you need to take it all up and remove as much of the compound as possible. Does the floor have a damp proof membrane ? How old is it? Before 1980 ?

Wrong screeding compound used and shouldn’t have been primed with that primer. Floors with old adhesive down needs ardex NA.