Search results

what type of mini expansion vessel would be suitable? Toolstation don't stock the shock arrester now :(

the cold taps also do the same, will 1 mini vessel be ok for both if I fit it before the tee off into the boiler?

is that like a shock arrester that you can get from Toolstation? Will it be ok that far from the bathroom?

We've had a new bathroom fitted and a combi boiler installed, from the old tank and hot water cylinder system. What we've noticed is there's a loudish knocking noise whenever the bath taps and basin are turned off. Could this be to do with the higher pressure? Any ideas how to quieten...

just to let you know an engineer came around and said it was flow sensor that was faulty, and new one is ordered :) thanks for your help

thanks no fault codes though. the boiler doesn't fire up when i open the hot tap

Hi, my combi isn't giving me hot water, it's running cold only. Any ideas what to check first or what it could be? It's a newish boiler, not ancient. Glow worm ultracom. Heating works fine. Thanks for your help

Hiya Just a quick question: I am going to change the pump head in my boiler as the pump is knackered. My question though is: Should I drain the boiler by closing the flow and return valves or should I drain the whole system down? I have heard the valves may leak when re-opened ? But...

sorry what I meant is when you say do a periodic inspection for a letting agent or when someone's selling their house, what tests do you usually do and use your meter for personally?

ok thanks for your help you've been very helpful! what do you usually use your for mostly? Do you use all functions?

wow not cheap are they. Do they have to be re-calibrated annually too? Yes for pro use, to do periodic inspection testing and to assist with some fault finding as well

thanks for your help davelx. What do you use your for, and what sort of cost did you pay?

Hi all Would instruments would you suggest for Inspection and Testing domestic installations? Are there any good value ones with 2 or 3 functions built in? Any to avoid or any you would recommend please?

thanks for your reply. I did remember seeing wickes do packs of 10 a while ago I think. What is the average price for a 22mm tee, 22mm elbow and reducer? About a fiver?

Do plumbers merchants sell end feed fittings individually? I have a small weep from a pipe under my bath, it is from a solder tee, which goes into 15mm from 22 at one end. I have never bought fittings from a merchants before. :oops: I basically need some 22mm copper pipe (about a...

a few diff toilets over the years

they were ones with the toilet and also ones already on the toilet

both new ones and older ones after dimsnatling! any tips mate?

looked ok and was a new one once (sponegey type)! so wrapoped ptfe around with silicone.

sorry mate no on mine i had a siphon and when flushed a few dribbles got out through wing nut holes ! siphon nut was tight