Search results

Thanks Pete in the block I have the L1 and 2 COMs. Sorry I don’t understand #4 Do I remove the linking wire and place the two COMs and L1s together on the new switch?

From the original wiring I have connected the two wires from one side of the original switch to the new switches COM and L1. What you see into the terminal block is the other side the original switch.. two COMs going into an L1 on the other side. Do I simply remove the linking wire and place...

This is how it is currently and not sure what to do?

Sorry tried via the block and it didn’t switch sorry didn’t see the above post.

Just tried and it’s on but not switching. Any thoughts please? Thank you

Perfect thank you! The other 3 wires to the terminal block they all connect together in the com?

Hi guys, I’ve just fitted a non-dimmable ceiling light and wanted to swap the light switch out. The current switch has two switches on it, one of which is redundant. Am I able to fit a standard 1 gang 2 way if so how. Photos below showing current wiring. Any help would be great thanks

Great, thanks very much buddy. I’ll give it a go. Appreciated ✌️

Hi guys, moved into a new house and would like to remove this wax from above the fireplace. Anyone know any tricks? Many thanks

Thanks mate, glad it’s working

Scrap this please. Strangely started working

Hi guys, recently moved into a new house and fitted an LED light. The switch doesn’t appear to be compatible with LEDs driver and am unsure how to resolve? I’m unsure why this switch is this type as it’s the only one like it in the house. Any suggestions on how to get this working would be...

Great thanks very much!

Hi guys and thank you for the feedback. It’s appreciated. I’m not a plumber and the access at the back of the cupboard is not great. I was hoping they would be a simple adapter that would allow me to couple on?

Hi guys, I'm trying to install a water feed on a Samsung Series 7 Fridge Freezer. I have a 15mm male gate valve that I would like to attached to at the back of a cupboard. Is there a fitting that I can purchase that will let me connect without having the change the fitting? The brass connector...

Ah okay, thanks. Yes 99% sure it’s under warranty. Must be less that 12m old.

Hey mate and thanks for the input. I just finished a job with water based satin and the gun stopped firing. I always strain prior. Can only assume it’s the hose as the pump seems to be running fine. It’s annoying as I know it will only get worse over time.

Hi guys, I wonder if someone could help? The hose on my Greco ultra quick shot appears to be blocked. Nothing is exiting the gun and without tip attached. I’ve tried running warm water through it and also methylated spirits. I had to quick look at taking it apart, however electrics run down...

Yes you're 100% correct. The realisation has sunk in :) Thanks