Search results

Don’t forget to test combustion once you’ve done it as you are removing the air chamber cover To access the wiring centre and could inadvertently effect the safe operation of the boiler. Really the job should be done by a qualified heating engineer.

Ideal Mexico 2 open flue on gravity HW that’s more like 30 plus years old

Soft water in Walkden mate won’t be scaled. What I tend to do with these set ups Saaz is take out boilermate and presuming pressure and flow rate is adequate which it is likely to be with a boilermate as I’m presuming you’re in a new build and there will be a 22mm main all the way up to the...

If in doubt go for the PCB :LOL::LOL::LOL::LOL:

Just fill it and have a look.

Nope Y plans can be installed and work just fine with no HW off wire from the programmer. The programmer would need setting to gravity mode to work like this and wouldn’t be the number once choice to do it this way. However it isn’t wrong it’s actually pretty standard

That would have been hilarious if it was a Viessmann 050 w boiler :LOL:

Do you want my number I’ll come and give you a price to do the job. You can take the head back you’ll never use it :LOL:

I’m a year in with this piece of **** alarm send it back to e spares and get a decent one is my advice pal

If you paid £850 for a full system then everything fitted is stolen. Should be expecting over double that for a straight swap of the boiler and a proper job and that's in the north

Wires hanging out of the receiver aswell **** poor I hope he was the cheapest quote :whistle:

Ok update guys rang E Spares yesterday told them key pad seemed unresponsive and faulty they sent me complete new alarm out today so quite impressed with them. So I've now set the alarm up with what comes in the box, 2 PIR's and 2 door/window sensors , code and fob all works to deactivate and...

Ah yes good point, problem is how does it know which sensor is covering the front door? The main issue with this alarm for me is it's complete lack of info on install, set up and use extremely poor, Honeywells site is just as useless, it's ****ing me off now you get more info setting up one of...

Is that because they're so difficult to set up? I'm a heating engineer by trade and have used loads of Honeywell wireless heating controls they have a good reputation and higher end of the market in that Field , so thought I'd go for it , regretting it now The manual that comes with it says...

Alright guys just bought one of these for my house tried to follow the manual, however it's poor lots of pictures and next to no explanation I have the 2 sensors up that come with it, I can arm the alarm by pressing the tick bleeps for 30 secs then it's set. Walk I front of sensor alarm goes...

Why not just call BG upgrade to Hive 2 for £99 and they will fit it properly for you , job done

The reason the EV hose is blocked is because you keep losing pressure and putting in fresh water , fresh oxygenated water continually added to the system will cause rust hence your brown/ orange blockage , you could flush to removed the rust in the system but if the pressure loss continues which...

It's a P+ rad , could you give us more pictures please mate I can't tell what you need to do :LOL::LOL::LOL:

just had a plasterer plaster my house, one of the rooms where he's trowled up at the end he's got water marks all down the plaster ,when I'm painting in other rooms I've noticed it's hard to,cover these marks, but this room has loads is there something I can use to cover like a stain blocking...

I was reading this is disbelief then I realised I'd clicked on electrics and not combustion chamber now I feel dirty being around all you dirty sparks , I'm off now to the no1 trades forum , enjoy :LOL::LOL::LOL: