Run a blade along the silicone against the floor all the way. At least then you can prove if its really holding the floor or if there's actually...
I think you need a lead flashing that is cut into the wall
I think aerogel products give very high performance per thickness, not sure about the price though:
I used Mapei primer G sucessfully on aquapanel. No leaks, nothing has fallen off and its been up for years now.
What about chemical paint stripper, Nitromors seems to eat most old paint.
From the manual for some similar equipment:
The initial surge required to start the motor is provided by the boost circuit of the converter. The...
A reasonably priced UPS isn't going to help much with surges and spikes etc, they just provide a backup when the power goes out, and only switch...
I've found the best sandpaper for this is the open mesh type, doesn't clog up as easily.
Are you sure there's not a trap at the bottom of the gully like this:
The beads went on right before plastering, i let the guy do that how he wanted it, just did the boarding myself.
I've done similar before and the plasterer used a stop bead (i think) around the edges which worked well. Look up Soss hinges as well.
I would yes, not that difficult to re-align, just get one of those cheap meters for when you put it back up. Will end up a better render job than...
My Facom crimp tool does both sides in one go. No need to reverse anything.
These work well and dont affect the door until its almost completely closed. Quite big and obvious when fitted though....
Is it the sort of light fitting that could now be full of water? if so that needs to be dried out before using it again.
Are you sure there's a fuse in there? most lights just have a fuse in the plug. Its really hard to picture what your talking about without a photo.
If your confident using a multimeter to measure mains voltage, I'd start by opening that cover on the left with the sticker "off isolator ok" and...
Oh, I need side hung to be able to have the 1/3, 2/3 split as the door willl be the only access into the garage and need to make it easy to get...
Hi, I'm considering a side hung metal garage door:
Does anyone have any experience of these, are...
I've found that to happen when using old cans (past the date on the can), once the valve opens it doesn't fully seal again making a right mess
Separate names with a comma.