Search results

  1. N

    help trying to find white 110mm or 100mm soil stack items

    Hi All, I am looking for simple stuff... all solvent weld pipework none of this push fit stuff 100mm 92.5 degree branch in white 50mm reducer that will fit inside the 100mm pipe 50mm pipe in white 100mm pipe in white 100mm end cap the solvent pipework must be flat on the...
  2. N

    drainage parts required

    I am looking for simple stuff... all solvent weld pipework none of this push fit stuff 100mm 92.5 degree branch in white 50mm reducer that will fit inside the 100mm pipe 50mm pipe in white 100mm pipe in white 100mm end cap the solvent pipework must be flat on the outside like...
  3. N

    Plumbing & Drainage Pipe work woes

    Hi All, I am looking for simple stuff... all solvent weld pipework none of this push fit stuff 100mm 92.5 degree branch in white 50mm reducer that will fit inside the 100mm pipe 50mm pipe in white 100mm pipe in white 100mm end cap the solvent pipework must be flat on the outside...
  4. N

    plasterboarding over plaster and lathe - help ?!?!?!?

    i have a room size of 3200mm x 4000mm. i've had a leak and the plaster and lathe is now coming loose. the leak is now repaired but the ceiling needs repairing. now i'm a general handyman and trying to workout the quickest and cleanest way to fix this, as it is in my bedroom, which has...
  5. N

    bamboo flooring - now has gaps

    hi, i have had bamboo flooring fitted about 2 years ago, glued on the join. it has now developed a gap in the middle of the walkway it has seperated the middle two planks for about a 3m length. how can i rectify this?? i have tried the flooring crowbar thing... im going to try the...
  6. N

    perlin question

    does the roof perlin need to be one length or can it be in a couple of lengths supported down with a 90 deg support? i am looing to do a loft space (not conversion) but the existing perlin is rotton
  7. N

    is this legal?

    having a boiler in the loft????
  8. N

    Can you have sludge build up in the DHW heat exchanger?

    simple question... Can you have sludge build up in the DHW heat exchanger? thanks
  9. N

    where to place a thermostat?

    is there a general place where a thermostat should be placed? i have a hallway down stairs and a landing upstairs, it seems that upstairs is always colder than downstairs would the landing be the best place to postition a thermostat or is it generally the downstairs hallway?
  10. N

    immersion heater cable size

    ok i have done my calcs and this is what i have come up with. a) 25m from CU to Immersion heater (50m ring not radial) b) Immersion heater is 3kw c) Cable is going next to central heating and hot water pipes approx temp 60-80 deg C, approx 200mm from the pipes, boxed in together d) Going...
  11. N

    anyone seen a chimney supported like this?

    right side breast at the bottom its been tapered off and blocked with brick ??? the breasts below are gone...[/img]
  12. N

    Chimney Support Question

    I bought a house two years ago and my next door neighbour has decided to remove their chimney breasts (leaving the stack) and supporting it in the loft via a gallow bracket. now it got me looking at my loft and breast... (now nothing was mentioned on the report regarding this)...
  13. N

    Loft Eaves Supports

    in my loft i have timber supports in a V shape to support the roof. what is the minimum height of the timber to support each eave to the loft floor, if there is one? (i know that i may need a rsj or another support across the loft floor) thanks
Top