Search results

  1. H

    Replacing UP2 & WR1 with Hive wiring help

    Cheers @flameport So I'm going to stick with 65 on the tank and I will put the boiler at 70....? That sound OK? I missread the hive instructions and went down the set up for gravity/part pumped systems... I saw the part pumped bit and went with that.... now I read it again I see it stated...
  2. H

    Replacing UP2 & WR1 with Hive wiring help

    All done... found the hive set up at toolstation, fetched it and after a bit of messing around with the buttons have it all progrmmed up... I have it set in 'gravity fed mode which I think is correct.... While I have you @stem , I know this has probably been asked and answered a million times...
  3. H

    Replacing UP2 & WR1 with Hive wiring help

    Thanks @stem I will order the hive and whack it on! You have saved me a lot of faffing about.
  4. H

    Replacing UP2 & WR1 with Hive wiring help

    I was hoping to get you @stem . Thanks for the reply. Just to clarify.... Room thermostat cable? I have a wireless thermostat that talks to the WR1 (I believe).... The WR1 is currently removed with a link between terminal 1 and 3 to bypass its function for now. Below is the photo of the WR1...
  5. H

    Replacing UP2 & WR1 with Hive wiring help

    I have done a bit of searching online and find a lot of hits here but nothing that is specific to me so I have signed up for some expert help. I have a convensional boiler with Birtish Gas UP2 programmer and WR1 reciever with thermostat. My WR1 has failed (did have it repaired by a guy on ebay...
  6. H

    Do I need building regs?

    Just to also add... I am in the UK...
  7. H

    Do I need building regs?

    So I am planning to pay a builder to take out a structural wall (ground floor supporting floor above)... I have a had a builder come in and quote up for the work... When I mentioned building regs to him he asked how long we were planning on staying in the house... I told him we will be here for...
Top