The shock absorbers should be difficult to compress by hand.
When the machine is empty of water put it on the drain cycle take the filter out and see if the pump impellor is turning . Selecting spin only on...
Have a close look at the lower spray arms, they sometimes spilt on the side seams and put a sideways jet of water out, overwhelming the lower seal.
I would check the clock isn't on auto for starters.
Yes. Power off, pull the cooker out, remove back panel of cooker, locate the two screw heads and undo.
Please OP, take the back off, find the two philips headed screws and undo them. regardless of whether the new one is threaded the old one is.
The original element is screwed in from the back.
You need to watch it and see where it's leaking.
Having issues with this boiler, every 24hrs or so I find the central blue light flashing. If I do a reset it will try to light and eventually...
F21 on older Bosch machines usually means worn motor brushes.
have a close look at the front contacts of the selector switch, you may find they are damaged.
Try AEG, Zanussi, Electrolux part no. 4006020327. it goes by the make of motor used.
Try bosch 427903.
To remove the PCB there are two metal lugs on the other side of the box, they need to be bent away, then two clips on the box itself.
Wooden panel off first, which should be held by four screws, the one nearest the on off button and same other side. Then the two screws two up...
It's inside the door directly beneath the program selector buttons.
ok thanks for the advice.
Click LVT, would the joins on the ply creak if they are touching.
Opting for 9mm ply on top of chipboard flooring, 6mm seemed to flimsy. Should I leave a slight gap between the ply 8x4's before I screw them down.
Is there a hole in the timer knob next to prog. 5. If so push something in the hole it should release the knob.
Separate names with a comma.