Search results

  1. B

    Miele WM - Squeak -> spin -> Tech Fault msg

    You could put it into service mode to check the actual fault codes. Ensure door is shut and machine is off: 1. Press + hold start/stop button 2. Switch on machine 3. Moment that start/stop button illuminates, release the start/stop button 4. Immediately press and release start/stop three times...
  2. B

    Extra 22mm boss on HWC, can I use it for shower pump?

    I went for the 180ltr HWC to feed a single shower without side jets. Its quite powerful, but suits us. I used a new tapping from the cold tank in the loft, staggeringly massive ( for the size of property) and have had no need to upgrade it. Sizing wise everything seems to have worked out with...
  3. B

    Extra 22mm boss on HWC, can I use it for shower pump?

    Hi, My pump has been running from the side boss (without any form of dip tube), for about 6 months. Pump is a Turner Monsoon 3 bar.
  4. B

    Extra 22mm boss on HWC, can I use it for shower pump?

    I have a similar cylinder - Range stainless? In the end just took the shower pump feed direct from the side boss. I wouldn't like to file the stop down in case the tank's integrity is affected.
  5. B

    Hotpoint BCI450 Dishwasher Failure

    Hi, If you look at the underside of the PCB you'll see four LEDs and a small surface mounted push button. You can see the detail at the following website when you look at the other photos...
  6. B

    Hotpoint BCI450 Dishwasher Failure

    Hi, Whilst mid-cycle our dishwasher decided to trip the ring main RCD and belch out a load of toxic fumes. On closer inspection I've found that the wiring connector to the inline heating element to be totally melted... I've checked the following: 1. Resistance between load terminals of...
  7. B

    Worcester 12RI Wiring

    Thanks for that! The news makes me happy again. Cheers.
  8. B

    Worcester 12RI Wiring

    Hi, Boiler is being replaced and in preparation I am carrying out some wall work. In doing so, I am in a good position to relocated pipework and so on. System is Honeywell Y plan. My question iswhether the existing 5 wire pvc cable that's connected to the original boiler can be reused for...
  9. B

    Trimming Interior Doors - Oak

    Hi again, I don't have a link to hand, will try to dig one out later. Cheers.
  10. B

    Trimming Interior Doors - Oak

    Hi, Thanks for your response. The door isn't a flush panel and so doesn't have eggshell construction. Hopefully that means I am in luck and should be able to veneer the edges? Thanks, Ben.
  11. B

    Trimming Interior Doors - Oak

    Hi, I'm hoping someone can help. I'm currently replacing all my interior doors with some panel style Oak/mixed hardwood ones. My problem is that I want to retain the style for the 2' airing cupboard doorway and the nearest door size is 2'3. From reading various DIY guides I understand that...
  12. B

    Myson Apollo 50B Boiler - Problems?

    Guys, Well done! Was a wiring fault in the (all too crowded) wiring backplate. Turned out that the pump overrun circuitry was connected to the boiler ON. I have to say not guilty but rule here is to never assume the previous occupants wiring was correct ;-). All fixed with no damage...
  13. B

    Myson Apollo 50B Boiler - Problems?

    Hmm, some more things to think about. I'll have a double check of the wiring and perhaps get a meter on the back of the programmer to determine what is happening when HW is demanded off. Thanks, will report back. Ben.
  14. B

    Myson Apollo 50B Boiler - Problems?

    Ahh okay, will check. Probably ought to get it serviced by a professional. Thanks for all your help.
  15. B

    Myson Apollo 50B Boiler - Problems?

    Does the pump overrun mean that the pump runs on after the boiler has finished? Presumably to keep the water flowing whilst the exchanger cools down? >> If you replaced it yourself then you will have to mope! Replaced the valve myself as the radiators were coming on with the hot water...
  16. B

    Myson Apollo 50B Boiler - Problems?

    Hi Stan, Thanks for your response. The three way valve was replaced last week - what makes you think its that which is wrong? Could it be the circuitry in it which is causing the boiler to keep firing up? Cheers, Ben.
  17. B

    Myson Apollo 50B Boiler - Problems?

    Hi there. I've got a Myson Apollo 50B balanced flue boiler which exhibits interesting behavior. It's a standard Y-plan system with (brand new) Drayton controls and a Honeywell cylinder stat. When the programmer demands hot water the boiler starts and heats the water, however if I cancel...
Top