Excuse the ms paint diagram, but this is the idea
free image hosting
5.5 & 7.2 k
Can anyone identify this part from our pyramid patio heater ? It sits on the control unit in the bottom of the tube
According to Both builders spoken to so far
2ft of footings
Red facing brick up approx 4ft
Block above (for rendering after)
No return on cavity...
I am getting quotes for a new porch extension as detailed here:
4ftx8ft brick and block work.
Slate gable roof connected to drainage....
So I left pan in place with water in. Checked after a few hours and water is all around the base.
No cistern attached, no flow through the soil...
Was the issue the pans ?
Sorry I didn’t get a photo but I will do, I’m away for few days but it’s just bothering me.
I suppose if the pan leaks when full without cistern...
As in through the flush hole ?
Spent a bit of time installing a new toilet with new flex hose and new pan connector.
All went well until I noticed that water was slowly...
I avoided the brush-in products after using some on my last patio.
Yes very easy to work with and imo look fantastic when first done, range of...
Cheers all. I’ll let it weather and revisit this
So I went with the semi dry mix which I am happy with in terms of the strength of the pointing. I think it will withstand a jet wash...
On a 3-1 ? Will the semi damp mix still stain the slab, obviously I don’t intend on getting any on the slab but it’s going to happen !
I have searched and found conflicting info on pointing my new patio. I’ve checked paving expert and again gives various options....
I am looking at getting a porch extension built. I currently have a front door followed by another solid wood door after approx 1meter...
Height to top of mantle is 950mm from the hearth.
The bottom of the lintle where the register plate is installed is approx 940mm if that helps
I would ideally like multi fuel but will mostly be burning wood.
I don’t suppose you have any ideas of a stove which may suit my needs ?
Thanks for taking the time to reply.
I was under the impression that the eco go by chatkton and Jenrick was 300mm to combustibles!? Do you have a...
After some advice re my planned log burner install (which will be carried out by a Hetas fitter)
I have had three Hetas fitters...
Separate names with a comma.