Search results

as the title says... anyone know of a direct replacement for 28mm 3 port valve v328 by landis and gyr ....thx

hi...been reading that " Epoxy Fortified Wood Stain " is a penetrating acrylic stain for decking..sounds good from the literature however i cant seem to find a retailer in the uk anyone use this, know where i can get it ? or know of a uk equivalent ? cheers

hi guys anyone had any experience with cooker extraction ducting. takeway near me has and extractor above the cooker...about 4 meters down it has what looks like an inline extrctor fan (to aid extrction due to distance etc i guess)..it then goes through the roof. they have asked i look...

seems likely an unvented cylinder.... :shock: http://www.bbc.co.uk/news/uk-england-leicestershire-10975124

Any one fitted the Water softners.. got a customer who wants whole house water softner of the type that does not need topping up with additives ? any ideas on make/model any thing to look out for ? ie w/b boiler fitted with ali exh....softened water at the kitchen tap ? cheers

Hello My name is Augustina i saw your profile today at(diynot.com) and became interested in you,i will also like to know you the more,and i want you to send an email to my email address so i can give you my picture for you to know whom i am. Here is my email address([email protected])...

Hi folks After some suggestions please I look after the plumbing of a local hairdressers in leicester. They have no gas mains to the building. They hae had hot water from a 1800 ? (therabouts) tall open vented cylinder fed from 3 side immersion heaters. They are now busier and are...

the other week i went to a large 4 bedroom house to sort out a rad that would not work. customer rightly suspected the lack of 22mm pipework as the main artery. i agreed and some days later i went back to do the work...lifting floorboards. the boiler flow and return were in 15mm from about 2...

well, what a day "Mr plumber, can you sort out some leaks on my bathroom suite" yes no problem this suite is new (only months old) doughnut leaked cistern not screwed, but siliconed to the wall (not a small blob, but all over) bath trap leaks and covered in plumbers mait customer wants a...

a brown patch has appeared on my ceiling...can you help

on the subject of condense 1 - Do you use 21.5 grey pushfit..or always white solvent weld 2 if you up it to 32 or 40mm to save on insulation is pushfit ok or do the rubber seals suffer and therefore solvent weld again?

do you know if transco come and up the flow through the gas meter if its only delivering 20mb working pressure at the meter Boiler fitted today and inlet working pressure was 16mb at the boiler.....altough gas pipe was sized correctly

hi guys... I work with a corgi guy sometimes. he rang me up this morning telling me he has heard you cant use solder joints under a fire (place). (he has had his corgi about 1 year) He told me cos i'm doing my corgi at the moment. He was also unsure about the accuracy of what hes been...

has anyone here had experience with solar and if so, would a direct solar, like http://www.solartwin.com/ be better that an indirect one, like most on the market, seemingly. the advantage i see with the direct one is a cylinder swap is not required, hence saving money for the customer any...

Me and my corgi mate came went to do a gas safety today. turns out no ecv on premises and gas meter is via a shop downstairs that is not always open. my mate AR'd it and closed off the appliances..per his book. the is a already fitted gas hob on a hose.....he says it should be rigid pipe...

i came across one today...hot water vent and central heating vent were both over the f and e tank...i know it ain't right ...but how bad is it ?? i cant think of any major/dangerous issues...but have i missed anything ? i'll be changing it before you get onto me ! :lol:

hi guys, My smeg d/w dwf614ss stopped working...would not light up, has power to it..... after a looksy, it has a blown pcb...burn/scorch marks on a couple of "electronics bits" Can these normallybe repaired, or where can i get a new one at a reasonable price.. thanks jamie

hi guys... Has anyone fitted a Trevi Boost shower..you know, the mains cold and gravity hot ones. Q - are the hot and cold pipes fed from the rear to the shower mixer and does the hose screw into the unit...or a separate fitting ?? what would make life easier is a trevi boost (for...

hi When doing a gas run i have been told that if a 28mm is required then, it can go anywhere...nearest to meter the better but its not necesarily got to be 28mm to the meter...it could have say 22mm for 500mm or similar and then up to 28mm..... is this right? ie my mate fitted a...

fellow plumbers...is it easy/possible to retro fit a coil to a vented cylinder ? reason i ask is cos today i saw a normal vented cylinder with a 2nd coil at around 3/4 up that was passing mains water through it to feed a shower..ie it was treating it like a thermal store...not a bad idea i...