Search results

  1. G

    Hub or non Hub System

    Hi all, a little new to the home automation set ups, have a few sonoff switched products running directly of 2.4Ghz wifi controlling lighting and a few plug in wifi switches, all working off Alexa without any issues. Have recently updated network to a Unifi Access point, everything still...
  2. G

    External Electrics Pre-Work

    Hi all Have used this forum a number of times in the past and am now back for some further good advice, I have found the past help invaluable in planning work etc. We are about to build a workshop in the garden which is away from the house, early nest year we are building a large extension on...
  3. G

    Power to Outside

    Hi All I would like to run a power line up the garden for the lawn mower and possibly some low power lighting ran off transformers. Before I get an electrician in and waste his time, I would like to check if its feasible to run armored cable outside to a socket location and then bring it back...
  4. G

    Driveway Paving Advice

    Hi All We are about to have our driveway paved and we cannot decide which paving brand to go with. We have a good selection of samples from Marshalls and Blockley but have also had fantastic prices from Brett (Omega Paving 60mm) and CharCON Europa (60mm) What we need to know is if anyone...
  5. G

    Driveway Block Paving Type

    Hi We are looking to have our driveway done in block pavers and we were recommended the Marshall range of pavers, the driveline 50, but since then, another person tendering has recommended using clay pavers and not the concrete ones such as marshalls. They say that they are more resilient...
  6. G

    Outside Cabling Question

    Hi all We have recently had our garden sorted out to allow rear parking and currently have the external ground level down a 300mm below damp course . this is currently about 450mm of scalping. We would like to fit an external IP65 weather box suitable for holding some transformers for...
  7. G

    8mm copper to 15mm copper on TRV's and Rads help

    Hi all, have a question and cant find a clear answer too in the forum We have recently had our house dry lined throughout and now the time to put the rads back on the walls is almost here. (At last, its damn cold at this time of year) A new boiler has just been added and tied into the...
Back
Top