Search results

Hi, my boiler was making a loud noise and the pressure dropped off. Called out British Gas, they bled the radiators and repressurised the system and everything was fine. Hey Ho. I then came home from work, and the boiler was on zero. I repressurised, put system on for hour, reading on...

I have reassembled the divertor valve (with a new washer) on my worcestor 240 but it is leaking, as though the screws are not tight enough. Ive loosened them and retightened but still leaking. Is there a special sequence to put the screws back or should i take it apart and put some ptfe...

Hi, The problem I am having is No central heating, the hot water is fine. Upon inspectin, I can see that the spindle on the divertor valve is permanently in the hot water position. Normally, when you turn the hot water tap on, the spindle comes out and pushes the microswitch. Now, the spindle...

Hi, I have a worcester 240 combi. It fires up ok, but no hot WATER or HEATING. I thought it may be the pump so I took the screw off the pump to see if it was spinning inside and it was. Came on later all working fine. But now seems to be faulty every morning but works later. My worry is...

Hi, water is dripping from the air vent valve in the top of my worcester 240 . Can anybody tell me why this is. and how I can stop it? thanks

I am going to descale the heat exchanger to increase the flow rate of this boiler. ~The DHW has a really low flow rate and does not fire up when tap is turned on. When heating is on, heating is good, and water is hot. Whats the best way to descale it, and will there be washers that need to...

Hi, does anybody know how to descale the heat exchanger on a worcester 240? The flow on the hot taps has gradually diminished over time and there isnt enough flow for boiler to kick in.

Help! the hot water flow from my boiler has gradually decreased over the months and how there is not enough flow to ignite the gas . Diaphragm in diverter valve is ok. I think there may be filters in the pipes that need to be cleaned. where would I find them? Any ideas ? :( Prompt help...

:( I replaced the diaphragm in the diverter valve in my worcester 240 . Now, the pipe leading to the heat exchanger is leaking badly. The one pipe slides inside a slighly bigger pipe-this is where the leak is. What kind of seal is it, is it an oring? please help asap Thanks