Search results

I have an AGA with an original Mark 1 Burner, which I have serviced every year and it works fine. The Burner is fitted with a Teddington TDH on/off valve with an integral regulator and lately the on/off valve has become very stiff and difficult to turn on and off. Both the Mark 1 burner...

Hello, I have a 7 months old Bosch Avantixx Dishwasher and the door will not latch closed - so the machine won't start. There is a plastic latch which drops down and locates in a groove in the top of the door. The latch seems to have dropped down while the door was opened and is now...

I need to remove my dishwasher temporarily and was wondering if there is a plug available to screw into the cold feed hose when I remove it from the back of the machine.

I had a upvc conservatory installed 6 years ago but lately I've had problems with the door, especially on warm days. It is a hinge mounted single door with three hinges like this: Lately the door is not latching closed properly ( when just closing the door without activating the...

I have a problem with water leaking onto the internal plaster ceiling in a bay window. It's a semi detached house and the bay is a ground floor bay with a flat leaded roof. The wall above the bay is stucco rendered and has some wooden beams inset into the stucco. All lead flashing is intact...

Hello, I want to put a longer cable on my new Bosch 34GC lawn mower and I have sourced the correct cable: orange 2 core 0.75mm squared. The terminal block in the starting switch on the mower handle has push fit electrical connections and I'm wondering whether it is possible to remove the...