Search results

I have a Aqara Smart Video Doorbell G4, it can run of batteries but they don't last long. I am considering wiring it up to the existing door bell wiring. However this is a rented flat and I don't want to break anything and need to be able to restore the old door bell when I leave...

So I live in a rented flat and want to be able to wash my mountain bike outside the flat. I don't want to ask the landlord if they could fit one (besides I don't see where the pipe goes). I decided to buy a Gardena an indoor adapter...

So about 2 years ago I paid an electrician to install a new fan. I am a landlord and he installed it whilst I wasn't there. The fan was a Airflow iCon 15S - SELV and the sparky fitted a transformed. outside the bathroom. The problem was that the fan was permanently on and I never got around to...

So ive had my power drill in storage a long time but now when I want to use it the chuck is missing a part. When I say 'chuck' I don't know if that is the right word but it's the inner bit which grips onto the drill piece. Not sure where it is and how to replace it? see photos...

So I am trying to replace my old JCC_FGLED6 LED spot lights my bathroom. I have done it before and swapped them with a JCC V50 https://www.johncribb.co.uk/media/wysiwyg/manuals/JCC_FGLED_Product_Brochure-April-2014.pdf The problem I have is simple..I can't get the power cables to disconnect...

Hello I want to replace this bathroom fan which I bought a few years back from ScrewFix https://www.screwfix.com/p/manrose-xf100lvt-sc-10w-bathroom-extractor-fan-with-timer-white-12v/14750?activeTab=qaTT I would like to know if it is possible to swap it like for like for another low voltage...

I have a Worchester Bosch Greenstar 25Si Compact Combi Bolier. In generally works fine however sometimes it needs topping up. To do this there is a little blue leaver on the bottom of the bolier. Recently this lever has got very stiff I am almost worried if I pull it down to hard it will snap...

So I have bit the bullet and ordered everything I need to create a base for my new shed. However I am a bit worried I may have ordered to much "Grando Tarmc to dust" https://www.diy.com/departments/tarmac-grano-dust-bulk-bag/165422_BQ.prd Each bag is about a 1 tonne and I have ordred 2. The...

ok so finally I have decided to lay a foundation my self using this method: I have calculated for my Garden I need 3.1 Meters by 3.95 Meters and will use 95 slabs 400x400. I am going to this 6mm to dust https://www.diy.com/departments/tarmac-grano-dust-bulk-bag/165422_BQ.prd I will need...

I need to build a foundation for a 11 X 8 Plastic shed. I don't plan to put anything particularly heavy in it. However I do plan to put a lawn mower and my bikes in there. I plan to concrete in place a ground archer for the bikes. The shed is in a closed if garden with 7 foot high fence which...

I need 2426KG of Ballast to make some concrete however Wickes only have it as 10sqm to 50mm depth is it possible to convert this into KG?

Hello I have ordered a new Keter 8 X 11 plastic shed, and plan to keep one or two of my push bikes in it. I plan to secure them via a Gold Secure ground anchor. However the shed will need a base, I am considering making a concrete slab my self by ordering the cement and other bits and mixing...

I have ordered a new plastic 8 foot by 11foot shed to replace my old wooden one which was falling apart. The existing foundation isn't too bad but it's not big enough it is about 7 foot by 10foot. I assume I can get a builder in to build a wooden mould and lay another layer on top? Only issues...

I have managed to get the chissel bit stuck inside the breaker any ideas how to get it out? Usually there is a bit you pull to release it but that is jammed stuck.

Hello I want to change my existing low voltage bathroom fan https://www.screwfix.com/p/manrose-xf100lvt-sc-10w-bathroom-extractor-fan-with-timer-white-12v/14750#product_additional_details_container my question is do I have to replace the transformer? or are they interchangeable with different...

Hello So I plan to install a new shed probably plastic 8foot by 6 foot where the old existing shed use to be. A few things to note the concrete is not 100% level however it is not far off see pics. There are some slabs around the edge how ever some are broken and there are gaps. The ground...

Hello So all I am trying to do so make a 45 Degree bevel cut? to some 12mm MDF This guy makes it look so easy When I do it the gigsaw starts shaking so much I can't keep it in a straight line... Would it be any easier to use a circular saw? any tips why is it shaking so much? Cheers

So I have a vanity unity in my bathroom with a 2 pin shaver socket. I use that to charge my Philips Shaver https://www.amazon.co.uk/gp/product/B0728K88K9/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Which takes up a lot of space on my sink as the cable won't stretch to far. No problem I...

Hello I was going to buy this shoe rack from Amazon, but I thought may I can make my self. https://www.amazon.co.uk/gp/product/B07JDLB7HH?pf_rd_r=M5Z09TD76F43CWCFD744&pf_rd_p=e632fea2-678f-4848-9a97-bcecda59cb4e I am a basic DIY'er I have a jigsaw however i'm not going to lie I do find it hard...

I want to replace this bathroom room fan that I currently have. https://www.sparksdirect.co.uk/manrose-xf100s-100mm-standard-bathroom-extractor-fan-for-wall-ceiling-20w-85m3-h-4-inch#.XtdkwsZ7m9Y I would like to replace it with one which has a smooth front...