Search results

I have been using ipolis DDNS with my Samsung SRD-443 and virgin router without problems. I have now moved to SKY and there is a fixed choice of DDNS providers on the router that does not include samsungipolis. In fact the only match between the DVR choice of DDNS and the router is noip.com...

I live in a 1970s link detached 2 storey house where my adjoining neighbour’s building line is staggered front and back. They have said that they wish to extend the rear of their house so that their building will be in line with ours and that they need to use part of the wall which adjoins our...

After becoming frustrated with a Chinese DVR with flaky software and performance I am thinking I should cut my losses and go for a DVR with some support and a name behind it. I am thinking about the Samsung SRD 443 as a replacement. Although on the face of it the spec. does not look as good...

I intend to fill in a small serving hatch (about 800x450) in a solid wall that is plastered. My thoughts are to fit a wooden frame and cover with plaster board each side. My question is what depth should I leave for the plaster. Any advice would be appreciated Regards

My split load consumer unit is wired as follows: Non RCD:100A Isolator Upstairs lights 6A MCB Downstairs lights 6 A MCB Outside lights 6 A MCB Alarm - 6A MCB Garage (attached) - 16A MCB radial with a RCD FCU feeding 13A sockets (Garage is used as a work shop and has 9 double and 2 single...

There have been some recent posts about connection to washing machines etc. In one post it was suggested that a switched FCU was fitted above the worktop feeding a 13A socket below. An option suggested that a flex connection unit be used instead of the 13A socket and that this would avoid fuse...

All my rads except the bathroom have TRVs and I have no room stat. There is no problem with the combi boiler heating but there is a bit of a mixture of makes and type of TRV as valves and or rads have been changed over the years and some of them are looking a bit care worn. I am looking to...

I have just got a new water section valve (part number 011292) which I am assured is the replacement one for my boiler. The new one is similar to the original and will fit but there is no connection on the top half for the DHW expansion vessel. Unfortunately it is not just a case of swapping...